Metal Siding Painting Advice

Painting metal and aluminum siding can become a nightmare if not done right. Over the years I have worked on and repaired many homes with metal siding. Metal siding is real common in mobile homes. Most older mobile homes use aluminum paneling for their exterior siding.

Most painted metal siding seems to last at least 20 years. The reason for this is the paint is baked on in a factory giving it a high quality and nice looking surface. This baked on method is used for painting aluminum and most metals siding that gives the product a long life.

I lived in a mobile home park for a few years and my next door neighbor's mobile home had never been painted and was over 45 years old. He would go out and washed the mobile home once a year with some TSP soap while using a brush on the end of an extension pole to clean the home.

His mobile home might not have looked brand new but it was definitely in great shape. Over the years he had developed a few scratches and some dirt that was hard to wash off but that was about the extent of the damage to the painted metal siding.

Well we painted our mobile home and used an expensive metal primer along with some expensive paint from Dunn Edwards & Co... This paint worked great. We lived there for around four years and never had any problems once the home was painted. Having been in the construction business I knew we had to use a good metal paint primer in order for the paint to stick to the baked on paint process for the metal siding to look good.

Here's my advice to you when painting metal siding.

1. Make sure the metal siding is clean. Use TSP soap along with a scrub brush and scrub that baby clean. The cleaner the metal surface the better the new paint primer will stick or adhere to the old paint.
2. Follow the instructions carefully on the paint primer can when applying the primer. Do not paint below or above the recommended paint temperatures.
3. Make sure you explain to the paint salesman at whatever store you're in that you are going to be painting metal siding. Get the right paint primer.
4. I would love to recommend a paint primer but cannot because I don't want to get a phone call from anyone a few years from now telling me the paint is peeling off of their home. Let that responsibility become the paint manufacturers.
5. Let the paint primer dry for the recommended time as per the directions on the paint primer can. I prefer letting the paint dry at least one week. The reason for this is some paint primer's stay soft for a while and if you paint over them immediately they doesn't seem to bond as good and sometimes will stay soft for a long period of time.
6. Apply your final coats of paint following the manufacturer's instructions on the paint can.

There you have it painting metal siding is all in the preparation of the surface you are painting.

Have fun painting and always read and follow the manufacturer's recommended instructions for the products you are using. These people test their products constantly and know the best way to apply them to any surface.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on different Types Of House Siding

Cellulose Wall Insulation
Plastic Tarp On Roof

Wood Sub Floors are a Rotten Choice

For many homeowners, the idea of a basement finishing is to remodel the area the same what the rest of the house has been designed. This means they'll want their ceiling to be made of drywall to look like the rest of their house. The furniture should be the same decor, and their floors- the wood sub floors and beautiful, thick carpet laid on top- should be placed downstairs as well.

Unfortunately, this is not going to work. A drywall ceiling is going to give little or no access to pipes running along your basement ceiling, and a single plumbing leak will cause enormous damage to it. The basement walls have fewer windows than the rest of the house, and if you lay wood on a concrete basement floor, it's going to lead to a home improvement disaster.

The problem is this: concrete is porous like a sponge. If you have moisture in the earth around your basement floor, the concrete floor will soak that moisture up from the ground and release it into the basement air in the form of water vapor. The dirt around your foundation was backfilled in when the foundation was built. Because of this, it will always be looser and more porous than the virgin earth around it, and water will always collect against your home's foundation more than anywhere else.

As this moisture soaks through to the basement and is released, it will collect on anything lying on your basement floor. If you've laid a wood sub floor and carpet on the floor, then you can count on that to soak up this moisture and grow mold, mildew, and rot. Your basement will fill with mold spores, dust mite feces, and unpleasant odors as your wood sub floors and beautiful carpet decays. In a few years, the damage will be more than you can stand, and the whole finished basement floor will need to be ripped up and replaced. The solution to this comes in two easy rules:

Rule 1: Never install wood floors in a basement.
Whether it's in the form of moisture coming through the concrete, a foundation leak, or a plumbing leak from within the house itself, water will reach the basement floor sooner or later. It only takes about 48 hours for mold to start growing, and there's no easy way to dry wood sub floors out. Installing wood sub floors in a basement is a risk at best and a disaster at worst.

Rule 2: Add a reliable plastic vapor barrier to your floor, then lay your carpeting on top.
A thick pile carpet will add warmth to the room and will absorb sounds, making the finished basement quieter than ever. It'll be softer under foot and will make the room as comfortable as possible for children to play in.

Once you've done a basement waterproofing, Basement Systems recommends and installs ThermalDry floor matting on your concrete basement floors. It creates a waterproof vapor barrier on your floor that will protect your carpet from basement moisture while insulating the floor to make the surface as much as ten degrees warmer than the concrete floor beneath. Our floor matting last twice as long and take only 3/8" of head room from the basement floor as opposed to the 4" that wood sub floors can use. Our sub floors outlast several generations of carpet, come with a written warranty, and will not support the growth of mold and rot. What more could you want?

Jacques Bouchard
Basement Systems
Total Basement Finishing
60 Silvermine Road
Seymour, CT 06483
800-541-0487 x9335

Alternative Residential Energy Choices

There are several ways to harness your own electricity and you're free to mix and match in order to reach your energy freedom goals. No, I'm not recommending that you do any strip mining for coal in your backyard or install a nuclear reactor.

Choices for Alternative Energy Sources

When it comes to providing some or all of your own energy sources you have options, and the viability of these will vary according to where you live. Live out on the open plains? You're a good candidate for windmill type power (wind energy).

If you live in the sun belt (below the Mason-Dixie line), solar power is your ace in the hole. Ideally, you can use a little of all of these to meet your energy demands.

If you happen to have a stream or fast-moving river in your backyard, you might just be able to harness that power to run your air conditioner, juice up your microwave, and heat your water. Let's look at these energy sources in more detail.

Electricity From Wind Energy

Wind is a great energy source because it's almost always in motion to some extent. And once you've got those big wind turbines set up and spinning, you're money ahead. Take that, electrical company!

This kind of power is generated using blades, like a fan, mounted on a pole, and incorporated with a wind turbine. The rotational power turns the turbine and converts this energy into electricity. To be most effective, many turbines are connected together on a "turbine farm."

Location of Wind Turbine Farms

These farms are usually situated on plains or beaches. Recently, plans have been made to install floating farms in the gulf of Mexico off the Texas coast. But for you, just stick them in your backyard. If anything, you might catch some flack from your homeowner's association.

Although wind power is "free" as far as the raw material fee goes, there are still construction and operating costs involved. And, since a wind turbine presents a pretty large target, it is considered to be a vulnerable asset during a hurricane or tornado.

Using Solar Power for a Residential Energy Supply

Solar energy is an even more predictable source of energy than wind. Even in the dog-dead still days of summer the sun shines, and even in the winter when the mercury drops, light energy is light energy. Solar panels also offer a smaller footprint than wind turbines.

They can either be mounted on a pole outside your home or simply laid on the roof of your home. And who sees it there? It might even keep some of that heat from entering your attic.

The Cost of Solar Power Panels

Solar panels may sound expensive, and believe me, they are, but when all things are considered, the bite isn't really as bad as the bark. The main manufacturers (which you should use because in this case, a good track record and reputation are gold) are General Electric, Kyosera, Evergreen Spruce, British Petroleum, Sunteck, and Sharp.

These companies are very competitive so the pricing structure is fairly level. As a baseline, for a panel that converts the sun's energy into 200 Watts will run you between $800 and $1000 plus your labor.

One of the upsides of this is that once it's installed you won't see it on the local power company bill. The other upside is that you will qualify for state and federal government tax deductions. Be sure to check your local details.

Using Running Water as an Energy Source

OK, granted that this option isn't much used by any but the most adventurous DIY homeowners. But if you're handy, you can put this together. You'll need a paddle wheel and you'll have to attach it to to a turbine, similar to the one used in wind energy generation.

You've likely seen plenty of these kind of set-ups in movies, but used to grind grains rather than turn a turbine. But the basic concept is basically the same.

How Does it All Work?

Your system will generate the electricity and store it in wet batteries. As you know, wet batteries are a direct current (DC) storage medium. Homes run on alternating current (AC), so something must be done to make the conversion.

You'll need a converter, or more properly called, an power inverter. Kyrosera does market one with their panels as a selling point. The batteries in the system are called deep-cycle batteries. This is unlike your car's battery which is a shallow-cycle battery.

The difference here is that a deep-cycle battery provides a steady low output of electricity whereas your car's battery needs a big jolt when starting and then charges steadily as you drive.

Can You be a Stand-Alone Energy Provider for Yourself?

Probably not. Whether you use wind, water, or the sun to provide raw material for electricity, nature itself is not going to be as consistent as a power plant burning gas or coal. The solution? Tie into the local power grid.

When you have less power than you need, buy some. When you have more, sell some; although they won't give you the same price they charge you.

You'll have to ensure the power company that you're power is compatible with theirs. It's important to be compatible with both their frequency and sinusoidal waveform. You will also have to be sure that when conventional power in your neighborhood is experiencing an outage, you're not feeding electricity into the lines. You might fry a lineman working on the system!

Copyright 2007-2008 Kelly Smith All rights reserved. This article may be reprinted by notifying the author.

Kelly R Smith is a freelance writer and a journeyman carpenter. He is a strong advocate of homeowner DIY and is the owner/Webmaster of http://www.icanfixupmyhome.com and may be contacted there.

Remodeling Books Save Time and Money

The other day, I was surfing the Internet and came upon an online home building bookstore that put together a website with the best-selling home building books on the market today. These books range from basic carpentry to advanced structural engineering and everything else you could possibly think of that could be related to the home building, selling, remodeling and construction process.

I couldn't believe the simple and easy to use. Here's a list of some of their books selections.

Photo Guide to Home Repair - The most up-to-date, complete, and useful guide to home repair a homeowner can have. With more than 350 projects and 2300 photos, virtually every home repair challenge.

Exterior Siding, Trim & Finishes - This first ever compilation by Fine Homebuilding on the popular subject provides builders with ideas for choosing the correct finishes for home exteriors, plus solid how-to information.

Flipping Houses - This book is designed for realty investors who want to profit from buying below market, making cosmetic improvements to add value, and then quickly reselling.

Bathroom Remodeling - Remodeling a bathroom is a challenge - it's action-oriented and requires extra energy and stamina. But you, undoubtedly, realize it's a challenge you want to take on.

One $20 house building books or home repairs book, can save you lots of money, if you're willing to do a little research and the labor to complete almost any home building project.

By the way, if you're interested in learning how to repair a roof, build your own house, interior decorating, structural engineering, building a deck, gathering some more information about home painting or even remodeling your bathroom. Our online home building bookstore can save you money if you're willing to do the work.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping

If your looking for some more Home Remodeling Pictures or home building ideas

Exposed Electrical Wiring Outside

Stair Tread Brackets - Remodeling Tips

Metal stair tread brackets are used instead of wood cleats and for plenty of good reasons. These often become a safety hazard over time, as the wood starts to deteriorate. Metal, will not disintegrate as fast as the wood it is normally attached to. In most cases the wood stringers and steps will suffer from wood rot or termite damage before the metal brackets become a safety problem.

Metal stair brackets, often require lag screws instead of nails or screws to attach the stair step to the stringer. These lag screws are normally an inch and a quarter for the stair treads, if they are built from 2 x materials. For example a 2 x 12 or 2 x 14 stair tread will require lag screws that will not go through the wood step. A 2 inch like screw will easily go through an inch and a half stair tread. If you're building a stairway, this will be useful information.

Some metal stair connectors have four holes on each side of the metal bracket for the lag screws, while other metal stair brackets have three holes on each side. This normally depends on the thickness of the stair tread and the use of the stairway. Public stairways will normally require the stronger stair tread connector.

During my career of building stairways, I have seen quite a few metal stair tread brackets. Some builders had custom made brackets to meet specific stair tread applications, while others used Simpson products, that are more readily available to home builders and contractors.

One of the biggest problems I have noticed, using metal stair parts is the lag screws can loosen up over time, creating a safety hazard. Warping treads, along with stair steps that split where the lag screw is located, seem to be the biggest problems associated with metal brackets. There are stair building safety codes that should be followed when building or remodeling stairways.

Staircases are normally high traffic areas and should be maintained regularly. Public stairways with high traffic areas should be maintained more often. Anyone walking up and down the stairways should notify the building owner of any problems, to prevent accidents in the future.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on building straight stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry

Wood Flooring Problems In Bath

Why Basement Remodeling?

With the long-running housing crunch in New York caused by the influx of people wanting to be a part of it; smaller living units have become the more popular choice posing as the more affordable option. Naturally, one thing that New York homeowners would have in mind when thinking of undertaking a home improvement project would be more living space. Instead of gaining a home addition that requires tearing down walls and extending the area of your homes, the best possible solution is exhausting the possibilities that any unused area in your home has to offer. This makes basement remodeling an ideal project.

Now you are thinking, 'Why would I want to use my dungeon-like basement when I could extend and create another floor above my roof or enlarge an existing room?' To answer this and lay out more benefits, here are several points explaining why basement remodeling is the best way to go:

- Basement remodeling is a lot cheaper to work on to add square footage to your current living area than a full home addition. Even with most or with every same feature and design, it would only end up costing just a chunk of the whole budget that a full-scale home addition amounts to. With the latter, there would still be a need to not only demolish any existing wall or roof, you would also have to rebuild another to surround the additional expanse. But with remodeling your basement all the crucial structural foundations are already built like the walls, flooring and ceiling.

- Unlike other home improvement projects, basement remodeling involves an area which is not much frequented and is quite isolated. So even when the project is undergoing, you and your family will not be required to put up with so much of the hassles such as the noise caused by the ongoing construction as well as the traffic of contractors and other workers going about their works.

- Being literally surrounded by earth, the basement is typically cooler even if the sun is sizzling hot on summers and warmer during chilly winter months. So no matter what finish you plan and come up with, it will surely be enjoyed with the added benefit of its energy-efficiency.

- The ready availability and easy access to plumbing makes adding another bathroom or a kitchenette ideal. You can do your basement remodeling to result to a luxuriant personal spa, turning every inch of your basement into a haven of utter comfort. But even if you have other plans, the new room could still make good use of the added bathroom or kitchenette. This idea would not only considerably boost the quality of living in your home but add real value to it as well.

- When thinking of the best finish for your basement remodeling project, you can take advantage of the compact nature of the structures making up the basement and its intentional remoteness from the rest of your home. These characteristics make up for utmost privacy as well as great sound proofing. You could opt to have a playpen, home office, music room, and home theatre out of the project finish.

These enumerated, excellently answers why basement remodeling. Another consideration to include in your home improvement project is a qualified basement remodeling contractor. With this, you are just some steps away from project success.

Eugene Makeev has been in the home improvement industry for a while. His skills and expertise, which have been polished through time, are now used to help New York home owners avoid the common pitfalls in home improvements by matching their needs with the right, prescreened Basement Contractor New York. Feel free to use our Basement Remodeling Calculator.

Painted Brick Stair Risers

Kitchen Islands Vs Kitchen Island Carts

It's a battle for extra storage. Every kitchen needs it, whether you have a large or small kitchen there's always a need for more space to store food or neat little appliances that are supposed to make your life easier. For the act of actually cooking many times you need more counter space and more places for handy tools that you use. If your walls are full the next obvious choice is the middle of the floor. So should you install a permanent kitchen island or get a portable kitchen island cart?

Both have their benefits and drawbacks. Let's look at a few:

1. Portability. The cart is much more flexible and movable than a permanent island. This gives you the ability to use that space for something else when you aren't cooking, yet have it back at a moments notice.

2. Available storage space. Most islands are pretty good size so you tend to have more storage available with the bigger island than with a cart. A cart has less storage, too, because to remain movable you don't want it to get too heavy.

3. Workspace. Kitchen islands tend to have a lot more usable counterspace than a cart.

4. Electricity. If you want to have outlets to plug in your appliances, or even install big units like dishwashers and ovens into your island then a cart just won't work. The cart has no outlets because it moves.

5. Looks pretty. Both can be aesthetically pleasing. The island looks more like a part of the kitchen, while the cart tends to look like an afterthought, but both can be made to look appropriate for the space they're in.

6. Available seating. If the island is big enough you can actually sit around it and eat. Most carts are too small for this feature.

To read more about the battle between kitchen island carts and kitchen islands please visit our website. We also have information on painting kitchen cabinets if you're doing a remodeling project.

92682

Dealing With Condensation

Last winter I had a major problem with condensation which was especially prominent under the bay window in the living room and the built in wardrobes in the front bedroom. I spent some time researching the causes of condensation and found that ventilation is key. The built in wardrobes were especially bad because they were located on a North facing external wall. They were also full of clothes and the when the doors were closed there was no ventilation.

Last winter I stripped the wallpaper in the built in wardrobes because it was covered in black mould and smelt musty. I bleached the walls and painted them with an anti-condensation paint. This did get rid of the smell but the walls were so cold that the anti-condensation paint didn't make any difference. When the warm air in the bedroom hit the cold wall within the wardrobe there was no stopping the water vapour from appearing.

Last week I thought to myself - "I need to do something about this condensation before winter arrives". Not knowing what the solution was I took a trip to B&Q and had a look around for anything that might have helped and there it was - 'Warmaline wall lining', basically a roll of polystyrene that you use just like wallpaper which provides an amazing insulation from the coldness of the wall. I added three layers in all just to ensure that it worked and to my amazement the walls have been consistantly warm. Not only does Warmaline insulate the wardrobe it also stops your clothes getting cold which in turn stops and damp and mould growth on the clothes.

http://victorianproperty.blogspot.com

Dealing With Condensation

Last winter I had a major problem with condensation which was especially prominent under the bay window in the living room and the built in wardrobes in the front bedroom. I spent some time researching the causes of condensation and found that ventilation is key. The built in wardrobes were especially bad because they were located on a North facing external wall. They were also full of clothes and the when the doors were closed there was no ventilation.

Last winter I stripped the wallpaper in the built in wardrobes because it was covered in black mould and smelt musty. I bleached the walls and painted them with an anti-condensation paint. This did get rid of the smell but the walls were so cold that the anti-condensation paint didn't make any difference. When the warm air in the bedroom hit the cold wall within the wardrobe there was no stopping the water vapour from appearing.

Last week I thought to myself - "I need to do something about this condensation before winter arrives". Not knowing what the solution was I took a trip to B&Q and had a look around for anything that might have helped and there it was - 'Warmaline wall lining', basically a roll of polystyrene that you use just like wallpaper which provides an amazing insulation from the coldness of the wall. I added three layers in all just to ensure that it worked and to my amazement the walls have been consistantly warm. Not only does Warmaline insulate the wardrobe it also stops your clothes getting cold which in turn stops and damp and mould growth on the clothes.

http://victorianproperty.blogspot.com

Home Remodeling Tips

Remodeling kitchen and bathroom project may be overwhelming, but can go on smoothly if you know a couple of pro tips.

1. Plan ahead, avoid delay: Plan ahead and make products selection early. Planning ahead would avoid delays and help you adhering to your budget.
2. Remember the big picture: Repairs, maintenance and energy loss are bound to happen. Always budget for these and include them in your calculations when you are comparing prices. This will help in avoiding hassles in future.
3. Get good help: Hire a contractor or a remodeler who has rich experience in kitchen and bathroom remodeling, positive customer reference, good record with better business bureau and a member of National Association of Remodeling Industry. Or, if you know a good remodeler whom you can trust, go ahead and hire him.
4. Visit a job site: When you are planning to hire a remodeler, check his companys website. Good remodelers always maintain a clean and an organized website.
5. Safety: Always take precautionary measures to guarantee safety. Have a low profile and do not discuss the details in your neighborhood.
6. Treat your contractor well: This is the best thing that you can do. Appreciate for his good work. He will be interested in sharing his kitchen and bathroom remodeling tips with you.
7. While doing your kitchen and bathroom remodeling, always insist for a contract. Not having detailed contract or no contract will create lot of legal issues. The contract should contain the address, the starting date and a completion date, and details of the project that has to be carried out.
8. Be prepared: Remodeling is exciting. At the same time, you should be prepared and get the details from the remodeler, situations to expect after the project has started. Situations like delays, inconvenience and frustration are all common. Getting to know them early will help you to manage better.
9. Find an alternative: During kitchen remodeling project, you may face lot of inconveniences in carrying out your job. Set up a temporary kitchen with your refrigerator and microwave away from the construction area. This will help you to prepare light meals whenever needed.
10. Pack all the crockery and other breakables from the kitchen to avoid breaking.
11. Express your ideas: Communicate with your remodelers and get sufficient kitchen and bathroom remodeling tips from them. Let them know what you have in mind and work together.
12. If you are not a frequent user of the tub, skip them and get showers instead. This will save your money and ensure effective usage too.
13. Avoid planning desk in the kitchen unless you would really sit down and plan in the desk.
14. Connecting spaces by opening up walls and hallways create more livable spaces. This is a great kitchen and bathroom remodeling tip.
15. Maximize storage by utilizing the wasted area efficiently and effectively.

If you're looking for more information about bathroom renovation or are looking for bathroom remodeling ideas come visit me at my bathroom remodeling blog.

You will find lots of information about bathroom tile design, shower and tub installation, bathroom remodeling tools, bathroom renovation ideas, bathroom remodeling pictures and even specific information about the topic of this article: kitchen and bathroom remodeling.

Building Safe Stairs in Vista California

As a general rule of thumb in stair building the sum of the tread and riser should equal around 17 1/2 inches. This is a general rule of thumb for a comfortable, easy to walk up and down set of stairs.

For example if your stair tread is 10 inches and the stair riser is 7 1/2 inches you have a comfortable stairway. Walking up and down a stairway using this formula creates a comfortable set of stairs. The next time you walk down any uncomfortable set of stairs measure the stair tread and riser. You will be amazed at what you'll find.

For public stairs or heavily used stairs this method will become one of your best friends. On public stairs you have liability issues and of course lawyer issues if you are the owner of the building. If you are not building a safe set of stairs that meets your local building codes standards you could be in for a whopping financial nightmare.

Building safe stairs as a contractor is your obligation to society. I don't know how many times I come across a loose stair tread or a broken hand rail. One of the biggest problems I find is in the poorer neighborhoods you come across some major construction problems and safety hazards. I never have been able to figure out why a building owner would not want to protect himself financially and the people that occupy and use his buildings safety.

Here's something you need to avoid when using the stair building general rule of thumb. This rule of thumb does not apply to good to an 8 inch tread with a 9 1/2 inch stair rise. You don't want to be building a latter you want to be building a safe set up stairs.

The maximum stair rise you can use for most building codes is 8 inches. You will not find the stairway to comfortable with a 9 1/2 inch stair tread and an 8 inch riser. If you have no choice and are cramped for space and you can't redesign this stairway to fit in the house or building then at least make sure you have a nice sturdy grip able stair hand rail.

This formula works great when you are working with exterior landscaping and you have a long run of stairs with a small rise. For example: if you have a 14 inch stair tread and you use a 4 inch riser this will lead to a comfortable step.

Look for stairs in your neighborhood or around some apartment complexes that don't follow these rules and have 16 inch stair treads with 7 inch risers. You will find yourself taking two steps on the stair tread on every other step and it is not a real comfortable stairway.

Happy stair building and keep this formula in mind for a nice comfortable set of stairs in your building future.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Home Security Books

Stair Handrailing Or Guard Rail

Before the 1980s most stairways had a handrail and to this day, most stair handrails are not considered guard rails. Well things have changed and now most stairways require a guard rail and it gripable handrail.

What's the difference between a stair handrailing and a stair guard rail, quite frankly about 6 inches. Your stair guard rails have a minimum requirement of 42 inches where stair handrails built before the 1980s had a handrailing for protection with a minimum requirement of 36 inches.

This does not mean that older stair handrails that are 36 inches tall will need to be removed and replaced, because the new building codes have changed. If you were to rebuild the stair handrail or do any work on the stairway that required a building permit, they could have you change your stair handrailing to meet current building codes.

I was helping another guy frame a new house in 2005 and while I was on the job I would mention to the owner, certain concerns of mine with other parts of the job. After a while he realized, that I knew what I'll was talking about and started to pay attention when ever I mentioned anything related to home building.

He asked me if I would be interested in building the stair handrailing system and at the time I was too busy. I reminded him of the minimum requirements for the stair guard rail, it was no longer referred to as a stair handrail and would need to be at least 42 inches in height and include a gripable handrail.

Well as you guessed it, the next time I walked into the home, I noticed a 36 inch high stair handrail. I reminded him and he wasn't too concerned, because he hired someone that knew all about building stair handrails.

The building inspector made him remove and replace the stair handrail, before he would approve the home for final inspection. Don't make the same mistakes, learn a little more about stair handrail safety and don't become another statistic in the home building industry.

Always check with your local building department, whether you're reading articles like this or asking questions to experienced contractors. Everybody makes mistakes and sometimes their information is out of date, according to new home building practices or building codes.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors

If you're interested in building stairs, whether you're a professional or a do it yourself homeowner, you should make your stair building and other construction projects as simple as possible. Check out the latest stair building tools, some of these tools can make even the average homeowner look like a building professional

Two Story Wood Siding Office

Wood Window Blinds - Are They Right For You?

If you want to add elegance and charm to your home, consider installing wood window blinds. These blinds can be stained to match any dcor. They can be made from a variety of different woods to please even the pickiest home owner. Read on to discover some of the greatest advantages of choosing wood window blinds for your home.

Wood window blinds can be custom made to fit any window in your home. If you have a preference, you may choose the type of wood that you would like your blinds to be made from. Having wood window blinds will give you maximum privacy and add a sense of warmth to the room.

Wooden window blinds will also increase the energy efficiency of your home. They are very effective in keeping out the sun and heat on those hot summer days and they can keep the heat in your home and the cold out on those cold winter days.

Wood window blinds are usually more expensive than fabric blinds or aluminum blinds, but they are more durable. The initial investment will be worth it in the long run. Wood blinds have been known to increase the value of your home if you ever decide to sell.

However, if you don't have the money to invest in genuine wood window blinds, there are other options. You may choose faux wood blinds for your window covering. These blinds are less expensive and in most cases, it is hard to tell the difference between real wood and faux wood. They are durable and easy to clean.

Another advantage to the faux wood blinds is that they can be used in areas of high humidity. Real wood may be a problem in these areas due to warping or cracking of the wood. This is not a problem with the faux wood blind because they are made of a durable moisture resistant vinyl.

Keeping these blinds clean is very easy no matter if you choose real wood or faux wood. If you have real wood blinds, all you have to do is dilute some wood cleaner or polish in water and dip a towel or other soft cloth into the solution. Just wipe down the individual slats with this solution to remove dust and give the wood a nice shine.

Cleaning faux wood blinds is even easier. They can be vacuumed using the brush attachment. If they are soiled they can be wiped clean with warm water and a mild soap.

Comparison shop before you make the decision on what type of wood blinds to purchase. Consider your budget and lifestyle. If you plan on installing them yourself, make sure that you know how to do it correctly to prevent damage to the wood blind or your window. Once installed, sit back and enjoy your new wood window blinds.

By the way, you can learn more about Wood Window Blinds as well as more information on everything to do with wood blinds by visiting http://www.WoodBlindsA-z.com

Home Repair Costs - Home Tips

Home repair costs can be quite expensive, that is why it is important to see how you can reduce those costs. You certainly don't want to have to spend money that you don't have, so it will be worth your while to look into what ways you can repair your home without paying an unnecessary price.

Below are ways you can do just that:

1. If some kind of accident occurred on the property that caused the damage, check with your insurance company to see if your home insurance will cover it. If so, that is money that you do not have to spend out of your pocket.

2. Schedule a home inspector to come to your home so that you can have all of the damage assessed. This allows you to see what needs immediate fixing and what doesn't. It also helps you pinpoint areas that could easily become damaged again after making the repairs.

3. Sometimes home repair costs can be reduced by doing things such as painting, cleaning, and waxing. An entire wall may not need replaced. It just might need some cosmetic help.

4. Compare prices at the various home improvement stores. You can reduce home repair costs if you look for the same quality materials at lower prices. Every little bit helps.

5. If you must use a home improvement firm, compare rates. Don't simply go with a company because they claim to be the best. Ask questions.

6. If you don't know how to repair common issues yourself, purchase a manual that can teach you to do so. You can reduce home repair costs by not having to hire a professional.

7. If you must get a loan to cover your home repair, be sure to shop around for the best interest rate.

8. You can also reduce your costs by simply using preventable maintenance. Tackle the problem before it exists.

9. If you use a professional service, be sure they provide you with a signed estimate before they touch anything within your home. That way, you can either negotiate with them or find a cheaper service.

10. If you can establish a relationship with a good home repair service, then you can reduce your home repair costs dramatically over time.

These are simply ten tips that you can use to make sure you don't pay more for home repair costs than what you have to. No one should have to lose money that they don't need to, so use caution and be patient. That way, your home repair costs don't get the best of you.

Ian Pennington is an accomplished niche website developer and author.

To learn more about home repair costs, please visit Quality Home Repair for current articles and discussions.

Home Theater Books

Renovate With EIFS - Home Tips

Ontario's Home Energy Audit provides rebates to home owners who improve their home in some way to reduce energy consumption and waste. The program provides rebates from $60.00 per energy-star qualified window, to $1,000.00 for a high efficiency furnace, to $3,000.00 for insulating the exterior of your home. Why is the largest grant (by category) given to Exterior Wall Insulation? One of the reasons is it can have the largest impact on keeping the heat inside your home as home owners typically see a 20-30% reduction in their heating and cooling bills after renovating the exterior of their walls with EIFS (synthetic stucco).

First Thing is First

In order to qualify for the rebates, you need to first have someone do the Ontario Home Energy Audit. This involves contacting the Government's ecoENERGY program to have an inspector come to your house and evaluate your eligibility. You will fall into various categories ranging from not eligible (because there is nothing that needs to be done), to partial benefits to improve certain aspects, to the full grant for adding something that is not currently there. The majority of homes do not have insulation on the exterior of their homes (from the sheating substrate and outward), which makes most home owners eligible for the full $3,000.00 rebate. From the day of the inspection, you have exactly 18 months to complete all your retrofits and get the auditor back.

Get Quotes For an EIFS Retrofit

It may even be a good idea to do this first so you don't waste time trying to find contractors and prices. It is important to get multiple quotes, from different contractors to get a feel for what the price should be. They can be found via the internet, yellowpages, referrals, or preferably by the EIFS manufacturer who will recommend you to a few contractors they know that do quality work. Speaking with different contractors will open your eyes to aspects others may not mention, such as decorative items or things you need to consider like temporarily removing your soffit. Things that may affect your quotes include:

• Time of year will affect price, which is higher during the winter and busy season
• Not requiring a weather barrier (only if going over brick, concrete or CMU) will save money
• Small portions (such as dormers) often cost extra
• Decorative elements such as mouldings and cornices cost extra

Let's say you understand what your options and prices are after getting 5 quotes, which do you choose? To start, if one is far below the others, toss it immediately. Any money you will save will come back to bite you down the road, and the repair can be more expensive than your synthetic stucco retrofit in the first place. Most of the time you want to go with quote #3 or #4 in terms of price. Don't forget that you can add decorative elements (like window sills, quoins, trim) at a later date -- one of the great benefits of EIFS.

Thickness of Styrofoam

Though this will affect the price and is up to your discretion, a minimum of 2.5" of "Type 1 Expanded PolyStyrene" (the white styrofoam) is required to qualify for the full $3,000.00 rebate. Typical styrofoam thickness is 2", which would get you the $1,800.00 rebate, however the additional 1/2" will not (or rather, should not) run you an additional $1,200.00, which means you will actually save money.

For the technically inclined, a total of R-3.8 to R-9 will qualify you for $1,800.00, while an R-value of 9 or above qualifies for the full $3,000.00 rebate. Type 1 Expanded PolyStyrene (the type of white styrofoam EIFS manufacturers carry and specify) is rated at R-3.71(per inch). This means adding 1" of styrofoam qualifies you for no rebate (yes, they are serious about that 0.09 of R value missing), while 2.5" will qualify you for the whole $3,000.00 (2.5 x 3.71 = 9.275). The other layers of EIFS do provide some R-value (arguable enough that 1" would qualify you for the rebate), however the government stipulates that the R-value is calculated solely on what is added to the wall via styrofoam.

Plan All Your Retrofits, Then Proceed

You want to consider other renovations at the same time as your Synthetic Stucco retrofit. If you intend to add Energy Star qualified windows, they must be installed prior to adding Synthetic Stucco so that they can be properly "tied in" to the wall, that is, to prevent moisture intrusion. You will want to cover these windows while the EIFS is being installed to lessen the chances of them getting dirty. Again, soffits need to be removed during installation to avoid unsightly gaps at the top of your wall which double as a point for water to penetrate. A little bit of planning goes a long way in saving you money and head aches.

Get The Auditor Back

Once everything is finished it's time to have the inspector come back to re-evaluate your home. You will need to show him copies of the bills with the specifications (for example, the EIFS contractor would specify "2.5" insulation added" on his invoice), and pictures of the product being installed may help -- make sure to find out exactly what the auditor is looking for during the first visit. Remember also, that you only have 18 months from the first inspection to get him back, otherwise you forfeit any claim you have to rebates. You may only do this once (ever!) so make sure you do all your retrofits at one time for the rebates, or be prepared to pay for future retrofits out of your pocket.

Upon verification that a minimum of 2.5" of insulation has been applied to all wall surfaces on the exterior of your home, the auditor will check to see if you qualify for any additional rebates for retrofits which may have been undertaken, then electronically submit the result to "Natural Resource Canada" and the "Ontario Ministry of Energy and Infrastructure". From the time your auditor performs the final evaluation, you can expect to wait anywhere from 5-9 weeks for the audit to be processed another 1-2 weeks for the cheque to arrive.

Don't forget that on top of the rebate, renovating your home with Synthetic Stucco increases the value of your home (you recoup up to 88% of the renovation cost via increased home value) and can reduce your heating bill anywhere from 20%-30%, saving you over $500 per year.

Jim Schwarznoff is a Construction Project Management student with an emphasis on the building envelope and exterior design. For more information on EIFS (Synthetic Stucco) and to get quotes from Stucco Contractors visit http://www.TorontoStuccoContractor.com/. For more details on the Ontario Home Energy program, visit: http://torontostuccocontractor.com/blog/2009/01/the-ontario-home-energy-audit-provides-3000-towards-an-eifs-retrofit/

House Pocket Door Problems

Just a few months ago I went over to repair a pocket door that was closing at a weird angle. This was the first time I had ran into this sort of situation and was definitely confused. I got a flashlight and started looking inside the pocket door frame. I had a hard time finding the problem but when I did it was obvious.

As the pocket door was sliding closed it would work perfectly but when you went to open it the bottom of the door would stick out about an inch and a half passed the door jam. The problem turned out to be the track was missing a screw in the very back and as the door slid back into the frame the tracking would hang down at an angle from the weight of the door. There was no way to reach the screw because it was at that very back of the pocket door frame near the framing itself.

In order to fix the pocket door problem I was going to have to remove a good sized area of the plastered wall at the upper right hand corner of the pocket door frame. This was the only thing I could think of and would require a simple wall patch and some paint to make the repair complete.

This job took me about one hour to cut the hole and replaced the screw that had fallen out of the pocket door tracking. I then use some fast setting drywall plaster and some fiberglass drywall tape to repair the wall. This took another hour to finish the drywall properly.

Some pocket door problems are a little easier to repair than this one. Most pocket doors seemed to have problems sliding and eventually are left closed, never to be used again.

Painting the doors over and over again can actually add to the thickness of the door or excessive moisture in the home over long periods of time can also cause the door to swell preventing it from opening properly.

Painting the rollers themselves or the track that the rollers ride in can create a problem with rolling the door easily and effortlessly. If the pocket door rollers or tracking is damaged they will have to be repaired or replaced, obviously. Some people actually spray silicon on the rollers or grease the pocket door wheels and over time the track becomes caked with dried grease and dirt making the door hard to open and close

Here's one most people don't ever think about and yet I have faced this problem more than once. "The Dreaded Picture Hanger". Most people don't realize that the pocket door will not operate very well with a nail driven through it. I have had people complain about their pocket door not operating properly but they can wiggle it a little.

When I come upon a situation like this it usually just requires removing the nail that the picture is hung upon.

I have also seen instances where the home has been remodeled and new floor trim or door trim has been installed. The finish carpenter using his nail gun without changing to a shorter nail has himself nailed the pocket door shut. This could be a big problem because the nails are so thin they could be hard to remove.

Well that's all I can think of for pocket door problems that I have ran into for now. Until the next article have fun remodeling your home.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Vista Door Repairs

Horizontal Brick Wall Damage

Home Insulation - Should You 'Do It Yourself' Or Use A Professional Contractor?

The Energy Saving Trust in the UK estimates that the average home can save several hundred pounds off its annual heating bills, and prevent the emission of over two tonnes of carbon dioxide into the atmosphere annually, by installing insulation throughout. Insulation is the single biggest measure you can take to cut the amount of energy you use in the home. Plus this will also make the average home more comfortable by making it warmer in winter, and cooler in summer. It's no wonder that hundreds of thousands of people a year in the UK are getting their homes insulated.

When thinking about insulating your home you are immediately faced with the choice of employing a professional contractor to do it, or attempting a bit of DIY. At first the DIY option can appear tempting. For example, some types of insulation, such as loft insulation, are not normally technically difficult to fit. The materials are readily available in most DIY stores. Plus many people automatically think that DIY is going to be cheaper than employing a professional contractor, because with a contractor you are paying for their labour.

However, in many cases they will be wrong because using a professional contractor is either cheaper or roughly the same cost as DIY. This is because installing insulation in the UK is now heavily subsidised by gas and electricity suppliers, in order that they can meet their carbon emission targets set by the government. These subsidies are funded by the power companies regardless of household income, and currently amount to between 50 and 70% of the cost of having the insulation installed. This usually means that using a contractor becomes price competitive, or in many cases even cheaper, than DIY.

Plus if you receive certain benefits from the government in the UK, you can get your insulation installed by a professional contractor completely free. This is because the government tops up the grants from the energy companies with its own subsidies to cover the entire cost of the work.

As well as financial considerations, there are other reasons why employing a professional contractor can be attractive. Firstly, some types of insulation do require special technical expertise. For example, to install cavity wall insulation - filling the space between your outer walls with insulation material - requires special machinery, as well as training. You should always use a reputable contractor for this. Although not technically difficult, installing loft insulation is often still a challenging DIY job. The working conditions in a loft are often cramped and unpleasant. Employing someone else to go up there is in many cases a much more attractive option!

As well as the technical challenges, DIY can also have a number of safety issues. For example, the mineral wool that is commonly used to insulate lofts can be hazardous. It is extremely important to handle it with care, as it can severely irritate the throat and skin. You need to wear protective clothing, including face mask, safety goggles and gloves. You also need to make sure that you do not expose the living areas of the house to the material, either when you unpack it, or dispose of any waste material.

If you use a reputable contractor, you can be sure that these issues will be taken care of, with much less hassle for you. You also know that the job will be done to a good standard, because of their training and experience. In fact, cavity wall insulation carried out by professionals in the UK comes with a 25 year guarantee if they are registered with the Cavity Wall Guarantee Agency, which most reputable firms are.

Given all of these advantages, we recommend that most people use a professional contractor to get their home insulated. It's generally competitive on cost or cheaper than DIY, safer, less hassle, and will be done to a high standard if you choose the right contractor. There are many reputable firms who can be accessed through the Internet They will offer you a free no-obligation survey, after which you get a quotation. They also give you access to the attractive grants and subsidies mentioned above. If you like what they tell you, then you can simply go ahead and get a date booked for the work, and look forward to a warmer home and lower heating bills.

Alex Perry is a founder of http://www.DownwithCO2.co.uk, which helps people cut their personal contribution to climate change through providing information and contacts.

Books on Home Building - Professional Advice

If you're a do it yourself or or a homeowner who every once in a while, once to tackle a small or large project but doesn't know where to begin, can gather useful information from home building books. I have been using these books for years and may have been worth their weight in gold.

I started my career working for my father and my father worked for his father as a Carpenter. Our job was to frame the house and we built a Lotta homes. I learned how to frame and developed some great carpentry skills from my father and working with other skilled carpenters. Over the years, if you're paying attention, even a monkey can figure out, how to assemble almost anything.

The only problem that I faced, was learning how to build the rest of the home. I would often ask questions to other building trades like plumbers, electricians, roofers and construction superintendents. Some of these people were helpful and others were not. When I was in my early 30s, I purchased my first book on home building. This book lead to other books and soon I found myself with more home building knowledge that my father.

I had about 50 books on home building and soon found myself doing large home remodels, with no formal education. I would attribute almost everything that I learned outside of house framing to books. These books have proven invaluable to me over the years and with a relatively small investment. I couldn't have spent over $200 purchasing these books but have used the knowledge from them to save myself thousands of dollars.

One $20 home building books or home repairs, can save you lots of money, if you're willing to do a little research and the labor to complete almost any home building project.

By the way, if you're interested in learning how to repair a roof, build your own house, interior decorating, structural engineering, building a deck, gathering some more information about home painting or even remodeling your bathroom. An online home building bookstore can save you money if you're willing to do the work.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping

If your looking for some more home inspection or home building ideas

Ghana Could Lead the World in Sustainable Building

A Ghanaian's heart seems always to be with Ghana. Though many of Ghana's citizens leave their native country for the purpose of earning money to support their families, many still dream to build their homes in Ghana. Being exposed to certain building technologies, Ghanaians may take more than money back home.

One of those technologies is the use of insulated concrete forms or ICFs. ICFs are a stay in place foam block that stacks to form foundation and structural walls. Once rebar is placed, concrete is poured into the cavity creating a 4 inch solid concrete wall with 2 inches of insulation on each side. At 6.5 pounds each, the ICF straight block is 4 feet long and 1 feet high covering 5.33 square feet.

Organizations such as Energy Star rate the ICF block as meeting sustainability and energy efficiency goals having an effective R-value of 32. Manufacturers report consumers as experiencing a 50 - 80% reduction in energy costs annually. Thermal imaging shows homes built with ICF blocks as having a temperature change of less than 2 percent. This means that during hot months, once the ICF home gets cool, it stays cool for longer periods of time as compared to a conventional built home. This feature further reduces the operating time of cooling or heating units. Conventional built homes show temperature changes of 11 - 20 degrees. The ICF home in Ghana would use roughly half of the energy as needed for conventional built homes. This is a necessary benefit in a country known for its fledging infrastructure.

Until now, concrete or sandcrete block has been the Ghanaian building material of choice. This is a Ghanaian age old tradition that has changed little over the years. In the age of the Sustainable Revolution, Ghana may be poised to make the transition to building with ICFs quicker than developed countries.

The insulating concrete form is a concrete product. The skill set to build with concrete block is easily transferrable to stack ICF blocks. Crews accustomed to the weight of CMUs can work with greater speed with the 6.5 pound ICF block. Not only is the ICF block lighter, it also replaces 6 concrete blocks and covers 5.33 square foot of exterior wall space. That's no small benefit to the Ghanaian owner who would in turn save on the cost of labor.

New construction technologies takes a strong market demand before becoming common in the marketplace. With the scarcity of ICF block manufacturers in Ghana, the transition may be a little slow. However, Africans in America are increasing becoming aware of the ICF block and wish to build with ICFs should the cost prove to be cost effective with the additional shipping charges.

Ghana has been called an underdeveloped country when compared to countries such as the United States or Canada. However, because of their customary concrete building practices, Ghana and other West African countries may very well become the leader in sustainable building.

Lakisha David, construction manager with Light Ready Construction, LLC. and supplier of ICFs to Ghana. http://www.lightreadyghana.com

Fixing Up Your Home And How To Finance It

Undertaking a home improvement project can be really expensive and thus, financing is essential. There are many financial products that can help you finance home improvements. Some are more suitable for the task than others but all of them have advantages and disadvantages.

When home improvements are necessary, the following financial solutions can provide you with the needed funds for the project depending on the amount you want: Credit cards, unsecured personal loans, mortgage loans and home equity loans. All of them (except for the credit cards) can be called home improvement loans because what defines a home improvement loan is the use that you give to the money. However, home improvement loans are usually either mortgage loans or home equity loans.

Credit Cards For Financing Home Improvements

Credit cards are undoubtedly great financial tools due to their flexibility. However, they are not particularly useful in terms of scrimping and saving. The interest rates charged by credit card issuers are significantly higher than the rates charged by lenders and thus, a $3000 home improvement project can end up costing $600 more per year. However, used in combination with other financial products like home equity loans, credit cards can provide the funds necessary for covering unexpected expenses in the project or additional improvements that may rise while the original project is on course.

Unsecured Personal Loans For Home Improvements

Unsecured personal loans are perfect for home improvements but can provide the funds for small projects only. If your home improvement plans will not be that costly, then an unsecured personal loan for home improvements may be the solution. Besides, personal loans have an advantage over secured loans: there is little to no paperwork and they are processed considerably faster due to the lack of collateral.

Mortgage Loans For Home Improvements

If your property is not securing any debt, then, you can request a home improvement mortgage loan. These loans come with the lowest rates on the market. Since you already own the property, however, the interest rate will not be as low as home loans for first time home buyers which feature subsidized rates. But the interest rate will still be significantly lower than that of any other financial product.

Home Improvement Loans Based On Equity

Last, but not means least, home equity loans are the most common form of home improvement loans. These loans are based on the equity left on your property. Thus, it does not matter if you have a mortgage balance on your property, you can still get finance for your home improvements as long as the value of the property is higher than the amount of money you owe that is secured by it.

The amount of money you can obtain will depend on your available equity. However, for home improvements, there are loan options offering up to 125% financing if you have a good credit score and history. Thus, even if you have only $10,000 left on a $100,000 property, you will be able to obtain up to $35,000 on a home improvement loan based on equity.

---

Jessica Peterson writes finance articles for Yourloanservices.com where she shares her knowledge about how to get money for a starting-up business, consolidating any kind of debt, repairing a home even with a bad credit history and more.

Drywall Repair - DIY Vs Hiring a Drywall Repair Specialist

Drywalls are common finishes used in the interior of homes whether in New York, or other cities in the U.S. No modern home could ever have been built without it. Though the building material has been manufactured to be tough, it is still not totally safe from any damage. Different levels of finishing, thickness and treatments that come with it offer various levels of soundproofing, fire resistance as well as impact tolerance. The extent of the drywall repair will be dependent on the degree of damage.

Also known as gypsum board, any damage to it is commonly remedied through homeowners doing the drywall repair themselves or hiring a pro. Though both options do have their benefits, they also have drawbacks. So when faced with any damage, it pays to carefully consider which alternative is best for your circumstance.

DIY Drywall Repair

Other than saving on the overall cost of the project, what drives many homeowners to do things themselves is the feeling of satisfaction upon finishing off the task successfully. Resources on the topic are abundant and you can easily look up helpful articles ad instructional videos about it in the World Wide Web, and even offline through magazines and books. The task is fairly easy if you are dealing with minor drywall repair involving slight dents, or small holes.

Just like other home improvement and maintenance project, the problem you would have to face if you try to handle the drywall repair on your own is the risk. Without any experience and skill, the risk of committing any mistake and thus sacrificing the quality of the result is huge, especially in cases where the damage is extensive. So if you think you are not up to the job, then better let the pros handle the work.

Drywall Repair Specialist

The factor that makes many homeowners cringe at the thought of acquiring professional help is the cost of labor, making up for the considerable difference when you think about how much the materials would cost. A hired drywall repair specialist, though, would save you time which you could choose to spend doing more important things. Equipped with the right tools and quality materials, you would not have to bother rummaging through the shed to look for tools.

In areas where guests are entertained like the living area or the kitchen, it pays to maintain their attractiveness. The smallest flaw could really take a toll in the area's appearance, and what more if there is a gaping hole on the wall? With a drywall repair specialist to do the job for you, the project results would be seamless and noticeably better; and a lot faster letting you enjoy the results in the shortest wait.

Drywall repair takes some practice and ample skills to produce results wherein the damage would seem to not even have existed. So when faced with any drywall damage, you have to weight your options carefully. The thing that you think might save you more could even cost you more.

Eugene Makeev of Craftsmen Network helps New York home owners avoid the common pitfalls with Brooklyn, NY drywall installers by matching their needs with prescreened drywall contractors NYC.

Please feel free to use our drywall estimator.

Bathtub And Sink Rough Plumbing

Garden Windows Add Light To Your Home

Does your home have a window that needs to be replaced? Wouldnt it be great to add space and light to your living room? If you are looking for a simple solution to window replacement that also gives you light and space then you may want to consider garden windows as a potential solution. You can do it yourself and even a home repair novice could install a vinyl garden window that will make your house look great and make it more comfortable for you and your family. With a garden window you can:

-Open your home to make it feel bigger

-Add a decorative flair with flowers or an herb garden

-It will make your home more valuable

-You will feel better with greater light in the winter

-They are energy efficient to save you money too

Since garden windows are energy efficient you will save more money on your gas or electric heating and cooling. Garden windows are also designed to hold your favorite plants, flowerpots, or even a lovely herb garden. They are well insulated so you will also keep your plants alive longer. The window catch a great breeze by extending outside your home and will help keep you cool in the summer with less need for AC. In the winter you wont worry because they are so airtight you will never let in cold air.

You have a ton of option with a garden window. You can have a side opening, double locks if you need extra burglary protection, or even have front awnings. This way if there are rain showers you can still keep your window open. Dont forget these are also great for storm protection.

Usually a vinyl frame is a popular choice and in all kinds of colors. Try white, tan or brown for some traditional. You can also paint over then and need hardly any maintenance. Vinyl will stay great for years and never corrode or rust. It is also a great insulator, better than even wood. You can get ones that are filled with foam if insulation is a big concern where you live.

Since its fast and easy to add a garden window, consider it for your home. You will receive so many great benefits and they will give you that lovely look youve been searching for. Shop around today and youll be on your way to better home.

Johnathan Bakers very often pens detailed reports on topics associated to home improvement. You might find out more about his contributions on gardening and garden windows at http://www.replacement-windows-tips.com .

Room Additions

Tips to Get the Best From Your Bathroom Remodeling

Many people mistakenly believe that the bathroom is the least important area of the house. Considering that this is the first place you visit after you get up, and probably the last place you go to just before bed, nothing could be farther from the truth. In fact, many people spend many relaxing moments in their bathroom, luxuriating in a bath while listening to soft music or playing with their kids before they go to bed. Therefore, it is only reasonable that many people want to remodel their bathrooms to give it the looks and comfort that the rest of the home provides.

Often, people are totally defeated by the thought of giving this small space a new look. After all, what is there to do? How much can one move the lavatory or the bathtub, and what would be the point anyway? Well, there are many ways you can use mirrors, lighting, free-floating cabinets and light to give this space a large, roomy and extravagant look. In fact, a properly done bathroom remodeling job could leave you open-mouthed! But you needn't call in the experts or pay through your nose for expensive designers before you get the bathroom of your dreams. Just follow the tips below and you could well be showing off your bathroom to your friends and family.

1. If your bathroom is cramped and starved for space, get rid of the tub. Go for a compact shower unit that has gleaming faucets and controls. On the other hand, if you have a large bathroom, make use of geometric designs instead of the conventional tub, and demarcate this area from the rest of your bath space.
2. Ax bare cabinets and vanities. Instead, make use of cabinets that are concealed nicely behind large mirrors. Mirrors increase the illusion of space and give a nice touch to your bathroom.
3. With the wide array of sinks and washing bowls available, it is not too difficult to get sleek designs that are compact as well as stylish. Glass fittings are popular these days.
4. Go for compact fittings. This will increase the illusion of space.
5. Make clever use of lighting to give the bathroom a bigger look. Allow light to pour in through frosted windowpanes. Use cool colors. Vertical stripes add to the feeling of space and height.
6. Get rid of dark fabric that makes the bathroom look dowdy and depressing. Instead, use light fabric in cool colors. Glass block windows should never be covered up, as they are great style statements.
7. Place lights above mirrors. Use stylish light fixtures so that bald tubes do not give off glaring light that hurts the eye. Place lighting fixtures in a way that they are nicely reflected around the bathroom.
8. Lastly, avoid clutter. If the space is small, keep unnecessary things out of it. Functionality should nicely be amalgamated with style so that you get maximum mileage from what you use in the small space.

Bathroom remodeling is not the tough job that it is made out to be. In fact, since you have to think sleek and slim, it is by far the easiest room to remodel and convert.

Bathroom Remodeling - First Choice Stone, specializing in granite countertops, and cabinets for kitchens and bathrooms is dedicated to providing old world quality and craftsmanship with innovative technology.

Measurements Of Your Bathroom

Faucet Filters Won't Fizzle Out

A lot has been heard about faucet water filters. But a lot of queries lurk in the mind of the consumers regarding their functionality, availability, affordability, cost, etc. Faucet filters are essentially carbon filters available in various sizes. You can install it in your kitchen, bathroom, etc where you can remove the impurities found in the water. You can replace the filters in the faucet water filter according to the impurities that needs to be shown the door. Each method used in a faucet filter can combat a specific sort of impurity.

The market has been inundated with faucet filters. But how would you know, which one will the best for you? If you use the price of the product as a yardstick, to judge its quality, then you are truly mistaken. There is a plethora of faucet filter in the market which is touted as the best faucet water filters because of their exorbitant price. But consumers have an opposite take on it. These costly products have failed to prove that they are effective.

The process of choosing the best faucet filter is very simple. You just need to clarify whether the faucet filter is equipped to eliminate the traces of trihalomethane and volatile organic compounds. Trihalomethane can play havoc with your body as they take you a step closer to cancer. Unfiltered water contains considerable amount of trihalomethane which will amplify your chances of contracting cancer.

Perchlorate is one of the most prominent volatile organic compounds found in the unfiltered water. It can hamper your metabolism and children face developmental disorders. Once both the above mentioned factors are taken care of, then you will become the proud owner of the best faucet water filter in town. And you do not need to worry about the prices at all.

Faucet filters are available in the range of one hundred dollars and they are truly effective in nature. You just need to make sure that it is certified to remove all the harmful impurities from the water and then price will not pose as an element of doubt as far as the quality of the faucet water filter is concerned.

Faucet filters are very easy to install and their cost is affordable. You can even take care of its maintenance which just consists of replacing the filter cartridge once in a year. Faucet filters are effective, affordable, user friendly and above all, it acts as a protective shield against all the health problems which takes birth due to impure water.

Shei Tan has been studying the effects of contaminated water for many years, and contributes to http://www.clear-drinking-water.com a site covering the very best methods for filtering and purifying water in the home. Visit the site now to find out more information.

Getting Rid Of Horrible Attic Sm

Top 10 Secrets to Small Bathroom Designs

It's official. Small bathroom designs are making an inexorable leap to the frontline in the contemporary interior design firmament. No longer are homeowners treating small spaces with a sense of passive resignation, and are in fact, breaking free from the shackles of convention and weaving magic in small bathrooms.

These homeowners stop at nothing to ensure that their personal space resembles a work of art. Gone are the days when the thought of decorating a small bathroom could dim one's ardor. Today, things stand at polar opposites. One finds an earnest desire to liberate oneself from the constraints of claustrophobic eyesores, even at the cost of demolishing long-standing rules in design books.

Secrets Finally Revealed

If a paucity of ideas to inject a dose of freshness into your small space is your constant gripe, it's time to unlock a few secrets. So shun that innate skepticism, and get ready to fire your imagination like never before. Here's how:

• If bathing luxury is your utmost concern, soak in a small but deep bathtub that does not occupy centre stage in the space.
• A transparent shower screen as against an opaque shower wall highlights your bathroom's intrinsic style quotient, leaving nothing much to imagination.
• Do not shelve plans of installing floating or recessed cabinets. Utilize the space on the wall to the fullest.
• Onlookers are sure to stand up and take note of space saving pedestal and wall-mounted sinks.
• Open doors to innovating space saving schemes with hinged or sliding doors.
• Windows in close proximity to the ceiling provide ample space on the walls for cabinets and shelves.
• Optical illusion is not something that only Chris Angel can perfect. Allow natural light to come gushing into the space through windows and skylights, and watch the extraordinary impact.
• The sparkle of under cabinet lighting and the shimmer of mirrors can take the space from dull and dreary to devastatingly dazzling.
• While vertical lines add inches to the space, the spectacular combination of identical wall and floor tiles creates that crackling chemistry.
• Don't remain in the dark about the colossal impact of light, pastel or neutral shades.

Learn exactly how to generate 100's or even 1000's of positively *BRILLIANT* Bathroom Remodeling Ideas ... FAST ! And here are 25 Dirt Cheap Home Improvement Ideas that could increase the value of your home by several $1000's ...

Bathroom Remodeling Problems

Hiring a Contractor For Bathroom Remodeling - Remodeling Contractors

Well here's the age old question, how do we go about finding a decent bathroom remodeling contractor.

Here's some things you will be looking for in a contractor.

1. Is Your Contractor Fair and Honest?

2. Does Your Contractor Have Experience Remodeling and Designing Bathrooms?

3. Can You Actually Find a Contractor Who Will Complete the Job in a Timely Manner?

4. Do You Think the Workers Will Be Able to Clean the Job up Daily?

5. Will the Contractor Show up on Time?

6. Is the Contractor Going to Work At Least Eight Hours a Day?

7. Does the Contractor's Crew Have Experience?

8. Is Your Contractor and His Crew Courteous?

If you find a contractor for your bathroom remodeling project that has answered yes to all questions above, hire that person immediately. Most contractors can sincerely answer yes to half of the questions above. If you're looking for the ultimate bathroom remodeling contractor, you could be searching for quite a while, you're looking for some one that is competent and you feel comfortable with.

When hiring a contractor, look for someone who has your interest in mind first and not theirs. Find someone who is willing to help with the designed process of your bathroom and the remodeling. If you find a contractor to be arrogant or controlling, there is a good chance, your bathroom might not turn out the way you envision it.

When hiring a contractor for your bathroom remodeling project or any home improvement project, the most important thing to keep in mind is, whether or not you feel comfortable with this person or not. Never hire a contractor you're not comfortable with.

If a contractor is referred to you by someone you trust, this does not guarantee you will be happy with the bathroom remodel. Most referrals that I have gotten over the years are like rolling the dice, I believe I would have done just as good picking a name out of a hat.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Stair Building Books

Where do we go to buy stair building books? Do we go to the major retailers like Amazon or Barnes & Noble? I have found over the years the information in most of these books I have purchased from these stores has a lot of fluff with very little common sense stair building application.

I bought one stair building book that had information on handrails. The front cover looked great and I thought this was going to be a great book reading the reviews from Amazon. When I finally got the book in the mail, I would say about one third of it was math tables for building elaborate wooden hand railing's. These tables were not easy to understand along with the rest of the book.

Back when I bought the book on building stair handrails it dawned on me that most of the construction workers I have met during my 30 years of working in the field were not very good outside of basic math. Now I knew a lot of carpenters that could read a measuring tape and use a framing square pretty good. But when it came to advanced geometrical construction projects like a stair hand railing system this was out of our league.

Reading this book or should I say parts of it gave me an idea to write a book of my own, starting with basic stair building I took all the fluff or the hard to understand advanced stair building applications out of my book, How to Build a Straight Set of Stairs.

I put a lot of time into creating an illustration for every possible part of building a simple set of stairs. I have probably built over 2000 sets of stairs during my lifetime and have explained and taught basic and advanced stair building to other carpenters. Understanding what parts of the stair construction process they understood, I was able to improve my skills as a stair building teacher.

Most people do not need advanced stair building skills to construct a simple straight set of stairs. If you are building a straight set of stairs and would like a stair building book with lots of easy to understand illustrations along with simplified directions you have found it.

We're building more stair building books to help contractors, carpenters, handymen and homeowners understand the stair building process.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Rear Hot Mop Of Shower Pan

Moisture Against Gravity - Destroying Walls

Well I'm going to start this article with a little information on a job I did once.

I had been repairing a rental house for one particular homeowner for about three years when all of a sudden I got a phone call from him telling me the rental house was destroyed and he had never seen nothing like this. He sounded so upset over the phone I told him I would meet with him immediately.

On my way to the house I was trying to get an idea in my head what the house was going to actually look like. Since I have been repairing rental properties for over 20 years at this point of my career, nothing really shocked me. I had pretty much seen everything that could possibly be done to rental property by the tenants that lived there. There is a lot to be said about taking care of it as if it were your own.

He was waiting for me at the front door and he looked thoroughly disgusted. As I approached him he was shaking his head and yelling at the same time can you believe these people, can you believe what they did to my house. I was expecting to see the front door ripped off and all the windows broken out of the house but this wasn't the case.

As he led me through the home and I could see the usual clothing on the floor, broken cabinets, a few holes in the walls and of course that awful smell of mold and mildew. All of this stuff was nothing new to me because I'm the guy they call to fix it when a renter moves out of the property.

As I entered one of the bedrooms I got my first glimpse of something I had never seen before but heard stories about and could not believe my eyes. Looking at the walls in the bedroom about 3 feet from the floor all the way around the room, the plaster was soft. It actually looks like someone shoved popcorn into the wall somehow.

The homeowner wasn't even looking at this because of the rest of the damage in the home. I started to explain to him I'd never seen nothing like this but I could guess it was water damage somehow since the plaster was soft. I could actually stick my finger into the wall, that's how soft the plaster was.

My first thought was to examine the carpeting a little closer to see if it was wet. Well it was damp but it wasn't as wet as I would've expected it to be with the amount of water in the walls. With a little more home inspecting I had found the culprit, it was a broken water bed. The water bed was now in the backyard looking innocent.

I couldn't believe a broken water bed could do this much damage so I looked around for broken or leaking water pipes and could not find any. The other bad news I had to inform the homeowner was that the water had damage the bathroom and closet walls also. These walls of course were on the other side of the bathroom walls that were damaged.

Well the point of this story is that water will actually wick its way up or worked its way up into a wall. I had to remove 4 feet of drywall all the way around the room. The plaster or drywall actually acts like a sponge pulling the water into the walls. Hard to imagine that gravity in this case seems to reverse. I would've never thought that water would've traveled so far up the walls creating that much damage.

To repair the rental property I had to remove the damaged drywall, remove the carpeting, dry the wood framing out and put the whole thing back together.

I'm still amazed and will remember that project for as long as I live.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Water Damage

Sink Vent Pipe In Wall Framing

Paint Me a Picture - No - Paint Me a Hall, DIY Style

Painting is one of the easiest DIY projects around. Novice DIY weekend warriors often begin with their DIY home improvement projects by repainting fences, hallways, doors, windows and walls.

Important tools

To be able to do painting jobs around the house, you would need the following:

1. Roller brushes of different sizes- you need different sizes, depending on the job. Roller brushes that are more than six inches in length are good for walls. Smaller roller brushes can be used to paint the bottom of walls. Small roller brushes can also be used to paint tables and chairs.

2. Synthetic brushes- synthetic brushes come in all shapes, sizes and colors. However, as a rule of thumb, purchase those that have fine yet durable strands. Synthetic brushes should be at least two inches wide. Larger brushes should have longer handles.

In addition, large brushes are heavier, so you have the option of attaching them to poles for hard to reach areas, such as the corners of ceilings.

3. Supply of old newspapers- you can use newspapers or similar recyclable papers. Use these to protect furniture and other surfaces when you are painting. Use plenty of paper when painting large surfaces such as walls and ceilings.

4. Plastic paint pans- pans can be bought from hardware stores. These specially made pans hold the paint on one side, while uneven surfaces allow you to remove excess paint.

5. Thinners- thinners will allow you to remove excess and encrusted paint on your roller brushes. Hard, encrusted paint can damage your roller brushes in the end. Never use water, as it will take too long to remove all the paint.

How to paint a hall

It seems daunting at first- the idea of painting a hall. But in reality, some tools and a bit of patience, plus lots of fun will get the job done.

The first step is to clear out your hallway. Put all the stuff in your hallway in another room. This eliminates the need to put newspapers all around. The risk of paint spots on your stuff is reduced to zero.

Second step is to clean the walls with a wet sponge and some soap. Rinse the walls and allow it to completely dry. If there is glossy paint, use a sandpaper to make the surface a bit rougher.

With a roller brush, apply the primer. Proceed to applying two coats of paint. Let the paint dry for a day or two.

Start re-adding things to your hallway. Old, useless things like unused golf bags should not be added to your hallway again. This process will de-clutter your hallway.

To beautify this space, consider adding plant life. Potted plants are a good choice. The potted plants need not be real. You can use plastic daisies or synthetic roses. Just make sure you clean your plants regularly with a wet piece of cloth to preserve their color.

If you do not have a clock in the hallway, consider adding a wall clock. Wall clocks can be either modern or completely classical with swinging pendulums.

The author of this article is Benedict Yossarian. Benedict recommends Roof Bond Foam Roof Insulation and Dekorbeton Concrete Stamping for your DIY needs.

Landscaping Books

Salt Water Pool Treatment Facts

While they were once only used sporadically, today, salt water pools are becoming more and more popular for homeowners. However, although many salt water pool manufacturers promote the ease of converting your pool to a salt water system, the pool treatment methods are not any easier than those of a typical pool. Before your convert your system, it is important to understand how it works and why you should (and should not) consider converting.

Salt treatment begins with understanding exactly how salt water pools' chlorination systems work. The basis behind this system is that you do not have to add chlorination for this treatment. However, that does not mean that there is no chlorine. That's actually a common misconception. There are chemicals in a saltwater pool. Treatment is still necessary, and although you do not have to manually add chlorine (in most cases), there is still chlorine in the system. The chlorine, however, comes from the salt itself.

A salt system is not the same as swimming in the ocean. In fact, the water in a pool system is actually still considered fresh water because there is only a very low level of salt in it (there's more salt in your eyes). However, this amount of salt, when put through a control box, can create enough chlorination to keep your pool clean, blue and safe for swimmers.

The control box on a salt water pool treatment system is a device that actually sends electricity through the sale. The longer the electricity runs through the salt, the more chlorinated the water will be. The pool treatment system should automatically control this, but you'll still need to use test strips to test for chemicals often. You can control how chlorinated the water is using the salt control knob. In addition, with the control box, you can tell when you need to add more salt to the system.

Although you will not have to add chlorine as part of your salt water pool treatment program, you will have to continuously check for alkalinity and pH level. It is a good idea to check your water once a week if you use it moderately and even more often if you use it often or get a lot of rain, which can affect the acidity levels. As part of your pool treatment plan, you also need to check the calcium levels in your pool. With too much calcium, your pool water will be "hard" and may leave unsightly build up along the steps and tiles. In addition, excess calcium in your salt water can clog the pump and control box system.

Salt water pool treatment is, for some, a better option than a typical chlorinated pool system. Keep in mind, however, that there are other options as well, and that natural pools are also becoming more popular. Pool treatment is an issue no matter what kind of pool you have, so don't make the mistake of thinking there is no work involved with having a pool.

Please visit us to see the problems with salt water swimming pools and having a chlorine generator