Building Codes - Stairway Construction

The stair building code was created for building safety. Before the building code and local city enforcement (Building Inspectors), anyone could build a house. This meant Uncle Earl who had just watched a couple of his friends build a house down the street construct some sort of a dwelling. The next step for Earl would be to help these guys for a day and now he is a professional home builder. You get the point.

Stair Building Codes create the safety needed for one of the most hazardous areas of your home. You might know someone who has fallen down a stairway?

I lived in a house I built for 15 years and I redesigned the stairs from a winder design to a T shaped set of stairs. Both sets of stairs were built using the local stair building code for my city.

Wow I could not believe how many times my family members fell down the stairs. I even fell down once. I was amazed. When I switched from the winder to the T shaped stairway there were less accidents. My point is that even using the stair building codes this is a dangerous part of your house.

Having a professional stair builder install your stairs is great advice. Take it. For example this happened to me on quite a few jobs. I get a set of plans from a architect who has been designing houses for over 40 years. I looked at the stairway to find out that he has designed a stairway that is too small for the length of this part of the home. If I build the stairs using the plans that by the way were approved from the local building department, I could have a problem.

You are probably asking yourself how does this happen. Aren't these people experienced professionals. Of course they are. They probably have the U.B.C. (Uniform Building Code) in their office somewhere. Everyone makes mistakes here and there but this is one area of the home where safety is a big concern.

Just look at it like this. The stair building code was designed to improve the safety and reduce the number of accidents while using the stairs. Over the years I have seen stairs poorly designed and constructed. These stairs create problems for the owners of the buildings not just the people that use them. Did I mention lawsuits. This is one area where a lawyer will have a field day.

As a building professional I advise you to use the stair building code first for safety and second to avoid lawsuits. Get an idea from some of the pictures I have taken over the years on problems with stair building.

Use common sense while building or remodeling your home. It goes a long way.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Stair Building Articles

Retaining Walls Suffer From Moisture Problems

Whether you're driving down the road or through a neighborhood and you notice a retaining wall that has large cracks in it, or is severely discolored, or one that has white calcium deposits from moisture covering the entire wall, you've got problems with moisture.

The retaining wall is designed to hold the dirt back, that's it's sole purpose. It's not going to hold any moisture back unless someone has installed a waterproofing membrane to separate the soil from the concrete block wall. If the soil isn't ever going to get wet, then you probably don't need to waterproof the retaining wall.

However that's normally not going to be the case. So we need to waterproof the interior of our retaining walls to eliminate future moisture problems that could eventually, deteriorate as moisture starts to accumulate, inside of our block wall for a longer periods of time.

If you don't know anything about waterproofing, I would suggest that you hire a waterproofing expert. Waterproofing looks easier than it actually is, and might be out of your scope of work.

I'm not going to suggest that you use waterproofing paints, because I haven't seen great results with these products. However, if you're not that concerned about your retaining wall and are looking for a cheaper way to apply any waterproofing materials, these paints might not be a bad idea. Sometimes, Something is better than nothing.

If you live in a relatively dry climate, it might not be necessary to waterproof your retaining walls. But if you live in a damp or moist area, especially an area where the ground is moist all year round or more than six months out of the year, I would suggest that you waterproof the back of your retaining walls.

If you're really interested in basement remodeling and repairs, you should click on this link House Basement Repair Ideas. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Dryer Vent In Basement Window.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Don't Let This Happen to You - Home Computer Electrical Damage

If you've read any of my other articles, you know that I am always coming up with great ideas, tips and even a couple of stories that can save homeowners lots of money. Here's another one of those stories, that involves a friend of mine who asked me if I could fix his outdoor electrical outlet.

I was over at his house one day, and told him that I could probably fix the electrical outlet and if we needed any parts, we could run down to the lumber yard and pick them up and his problem would be solved within a few hours. This two hour repair was about to cost him the hard drive on his computer, but neither one of us had any idea what was about to happen.

We each agreed to give it a shot, I told him to go over to the electrical panel and turn off the breaker that went to his outdoor shed. He proceeded to turn off the breaker and yelled out," It's off, try it." I plugged in an electric drill and it was still working, as he was walking around the corner, towards me, I showed him that the drill was still on and he hadn't turned off the right electrical breaker.

He went back and turned off a couple of more electrical breakers and the drill was still running. Now he frantically started to turn off one electrical breaker at a time, until I yelled out," It's off, the electrical power is, off you can stop."

I repaired the electrical outlet and he went back to turn every electrical breaker back on that he had turned off. We were proud of ourselves and he now had electrical power, back to his shed and he was happy.

Now for the bad news, his computer was running and when he turned the electricity off and on, it must've done something to his computer hard drive and it now needed to be replaced.

The moral to the story, isn't that you shouldn't help your friends. It's that you should, make sure that your computers are safely off, before you attempt to do any electrical work to your home.

It wouldn't be a bad idea, to have a battery backup, for your computer, if you use it often, just in case there is an electrical failure or something happens like the story above.

If your really interested in saving money on your home electrical bills - Energy Saving Books

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

10 Things a Homeowner Won't Tell a Contractor - Common Courtesy

I've been a contractor in the state of California for over 20 years and there are some things that a homeowner won't tell a contractor. These are a few things that a contractor might want to hear, but a reluctant homeowner, might have second thoughts telling their contractors how they really feel.

1. We are happy with all of the work that you did in a timely manner and we appreciate your services.

2. We are happy with the way you performed your construction tasks, efficiently and we appreciate your services.

3. The work was done by a true professional and we would recommend you to any one of our friends.

4. The payment plan that you created in the contract worked out perfectly and never made us feel uncomfortable. It never seemed like you had too much of our money or we were putting you in a bad spot financially.

5. Thanks for keeping the job clean, it meant a lot to us, because we have seen other construction jobs that look like a tornado ran through them.

6. Thanks for helping us with our design. Working with your contractor on a daily, weekly or monthly basis can be frustrating or joyful. Let the contractor know either way how you are really feeling.

7. You and your crew are extremely hard-working and we appreciate the simple fact that you didn't come to work late or leave early.

8. Thanks for the reasonable priced estimate on our project. You helped us say a lot of money and we appreciate that sincerely.

9. Thanks for doing the extra work at a reasonable price. You could have gouged us at certain times, but you chose to be fair and work things out, in a way that would benefit both of us.

10. This one is the most important and often overlooked by homeowners and it's simple and easy to do. Thanks for doing what you said you were going to do and actually doing it.

Just a simple thank you and paying them on time, for a service well done is enough for most contractors. However, a little common courtesy can go a long way, even in the construction industry.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Home Remodeling Contractor

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Click here if you're looking for additional Homeowner Contractor Advice. If you're interested in gathering more information on how to hire a good contractor, make sure that you visit our website.

Take Pictures of Your Growing Foundation Damage Or Cracks

I champion people and try to get them to look at their house, at least once a year. One of the easiest ways to inspect your home is to use a home inspection checklist and if you really want a good home inspection checklist, there's a good chance that you are going to need to purchase one. You get what you pay for and don't ever forget that.

Foundation repairs usually start with a small crack and that's no joke. If you notice a crack, take a picture of it and save it somewhere. If you think, that the crack is actually getting a little bigger or starting to separate, you can simply take another picture and compare the two photos.

I would like to give you an example of what I'm talking about. Sometimes we look at something and we think that it's getting larger, but we don't have anything to compare it to. As time goes on, we think that the crack is still getting larger, but our mind is creating an optical illusion. This happens to a lot of people.

If you had a picture, from a few years ago, you could refresh your memory and this could be very helpful in reducing your anxiety or jumping to conclusions about foundation damage. Trust me, sometimes, I'm like a medical emergency crew, going to visit a homeowner to relieve their foundations stress. People panic over foundation cracks and I'm the doctor they call for any one of their home emergencies.

I would also advise you to take pictures of the rest of your home. How hard would it be to take about 300 pictures of your home each year and store them on your computer or on a disk, for easy access later? A picture is worth a thousand words and don't ever forget that.

Click Here for Some More Great Foundation Repair Solutions.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Problems. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Do I Need a Home Inspection? - Real Estate Advice

Most home inspections today run between $300 to over $1000 and sometimes you don't really get your moneys worth. There are home inspection companies that guarantee, any problems that they miss will be repaired at their expense over a desired period of time, usually a year. It seems like, most home inspection companies are just inspecting the property and have no guarantees or liability from their inspection.

It's not a good idea to buy or sell a home without getting a home inspection from a licensed home inspector. This is like having a second opinion from someone who is usually skilled in the process. I would like to point something out to unsuspecting, potential home buyers and sellers. Sometimes a home inspection company will get a little behind in their work and need to hire other home inspectors if these home inspectors don't have any experience in the construction business or have never inspected a home before. In other words there fresh out of home inspector school. You might not get a good home inspection.

You can always ask the question, how long have you been in business?... How long have you been a home inspector?... have you ever worked in the construction business or have any skills in home building and remodeling. If the answers to these questions are satisfactory, it doesn't mean, that they're telling the truth and being sincere and could lead to problems later if they are lying to you.

Let me rephrase the question now, "Do I Need a Home Inspection" from an unqualified home inspector? Absolutely not. But how can you really tell the difference and is the report going to be worth the money that you paid for it.

What would you say, if I had the solution to your problem. How about a pre-home inspection, using a home buyers checklist? What if I could give you a check list with questions, that you could ask your home inspector? Some of these questions are not going to be part a regular inspection but should always be asked and make sure you get the answers to them, before purchasing the property.

Would you be interested now? What if I told you, for under $20, you could purchase a home buyers checklist, now for the tough question, this checklist could save you thousands of dollars and prevent you from purchasing a home with major construction problems or defects, and can be used on every house you look at.

Don't buy a home without purchasing a professional home inspection checklist. These lists of questions can save you some serious headaches and stress in the future.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

If your looking for some more home inspection or home building ideas.

Plywood Roof Sheeting - Roof Framing Trade Secrets

Most framing contractor's look at the building plans and order all of the material, according to those that are specified on the plans. This works out fine, and can often save you money, but rarely produces the best home that you could possibly frame.

As a professional framing contractor, I would like to share one of my house framing tips with you. Most plans require half-inch plywood or oriented strand board as their roof sheeting. This product is fine and if you're building a lot of homes, you're not going to have the choice. Ordering larger sized plywood could cost you thousands of dollars, especially if you're building a lot of homes.

However, if your framing or building a home for someone or even yourself, you might want to take my advice and think twice about it, before ordering the roof sheeting. Half-inch plywood, works okay for 16 inch on center roof rafters or engineered truss roofing systems. It doesn't work well on 24 inch on center roof rafters spacing.

It is usually flimsy and weak at the center point, directly in between the 24 inch roof rafter bays. If you're going to use the half-inch plywood, I would recommend using plywood clips that are relatively inexpensive and can be placed in the direct center of each roof rafter bay on each sheet of plywood. These can be purchased at most home improvement centers or lumber yards.

The other alternative, and this is what I recommend, would be to use 5/8 inch plywood. This plywood works great for 24 inch on center roof rafters and you will have a nice sturdy roof to walk on, while roofing your home.

I have actually seen people step through the flimsy plywood, while lifting heavy roof tiles and bundles of composition roof shingles. Experienced roofers try to walk directly on top of the roof rafters, when loading their roof shingles or even carrying them on the roof.

If you're a home builder and your concern is about making a profit, you will need to use the half-inch plywood. If you want to build a superior roof, use the 5/8 of an inch plywood.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link House Framing Contractors.

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a excellent home inspection checklist to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Tile Grouting Tips For Your Bathrooms, Kitchens and Floors

Isn't tile grouting supposed to be simple, if you read the directions and watch a couple of videos? What could make tile grouting so difficult? Grouting your tile isn't that difficult, by the time you're done reading this article, you should have a pretty good idea how to grout your floors, bathrooms, kitchens and anything else that requires tile.

I used to have problems grouting tile, but after I read the directions, I became a grouting wizard. This sounds hard to believe, but after reading the directions on the tile grout bag, I became a grout master. I know, you the type of person who never read the directions, you simply add water, mix and start grouting.

It's time to change your thinking about, whether or not the directions will be helpful. Whether it's about grouting your bathroom floor or putting together your home barbecued. I read one thing on the grout bag and it changed my entire grouting career.

The grout should slake. After you're done mixing the grout, you should wait between five and 10 minutes to let the moisture soak into the grout mix. Do this once, and you will never go back to mixing your grout and applying it, as quickly as possible after it has been mixed.

For more information on grouting, remodeling or home repairs, I would recommend reading books on home improvement and home repairs. Some of these books can make a big difference in your home improvement abilities as a handyman. I would also recommend reading more articles, there's plenty of information about tile and grouting, all over the Internet.

Click here if you are looking for some more Bathroom Remodeling Ideas

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Tips. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading the article

Important Do-It-Yourself Home Remodeling Advice

Often I'm asked by homeowners, if they think that they can build something on their own. Often I end up explaining the process to them and it's pretty confusing. I would like to give some homeowners and construction handyman some do-it-yourself home remodeling advice, about projects that I think they should avoid and the reason why.

1. Working on Electrical Service Boxes

I really don't recommend, anyone who lacks experience working with electrical, to be working on it at all. When it comes to the electrical service box repairs, if you don't have any experience working in this specific area, I am suggesting this to all homeowners and do-it-yourselfers, stay away from electrical service power boxes. Electricity can be extremely hazardous to your health, so take my advice, this is coming from an expert on the subject.

2. Plumbing Water Supply Lines

I don't recommend, anyone who doesn't have any experience working with plumbing water supply lines, because if they break, or if your repair, doesn't hold properly, you could destroy a large portion of your home. Picture this, you just got through putting a new faucet in, everything looks great, but it's time for you to go to your baseball game. You come home about four hours later and the entire house is flooded with water.

This kind of stuff does happen and you need to take the advice of an expert here. It has even happened to me and I understand the process, pretty good. If you plan on fixing any plumbing water supply lines, make sure that you can spend the time, keeping an eye on your new home repair. If you're going to have any problems with them, they will usually happen within the first few hours of use.

I hope this helps, sometimes it's better to pay a professional, but I can understand, every intelligent person, is interested in saving a few dollars and learning new skills.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Pictures and Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Vista Home Repair Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Five Things That a Termite Inspection Company Might Not Ever Say

I don't think that I've ever heard of a termite inspector, ever go to a home and not find any termites. Even if the home doesn't have any damage that is visible from the termites, it seems like it's always a good idea, to tent the home, just in case, for protection. Anyway, here's five things that you might not ever hear a termite inspector ever say.

1. Your house is free of termites. This means that there isn't, one termite on your property and the termite inspector isn't going to make any money. Let's face it, termite damage, whether it's visible or invisible, keeps these guys working.

2. Your house isn't going to fall down, if I don't do anything to stop the termites. I have seen homes, where termites have been working on them for quite some time and they still seem to stand up and function properly.

3. Termites don't eat much and I wouldn't worry about the damage. Most termite inspectors will tell you how much a termite in Hawaii or Africa will eat in a day, but doesn't seem to have an honest idea, how much damage they are doing to your home, if they can't actually see it.

4. Every one that works for our company, has at least 30 years experience, repairing any termite damage. Don't even get me started with this one.

5. We will replace all of the termite damage wood, back to its original condition. What they might say, is that they will replace the wood that is damaged by termites, that you can actually see.

There are plenty of great termite companies out there and this article was meant just to have fun with most of them. Termite damage can be a serious problem with some homes and I would suggest that you contact at least three termite inspectors, before proceeding ahead with any home repairs or use of chemicals.

Try not to forget, the only way that a termite inspection company will make any money, looking at your house, will be to find something wrong with it.

If you're really interested in basement remodeling and repairs, you should click on this link Easy Home Repair Tips . Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link San Diego Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in your concrete building foundation, you will need to protect them, from the concrete. You can use a variety of products and the most common of them will be a Styrofoam wrapping that can be purchased at most plumbing supply stores.

Let's start with the waste pipes, that are made out of plastic. The concrete could actually start to put pressure on the plastic pipes as the concrete starts to expand and this pressure could actually damage your new waste pipes.

You don't need to wrap all of the plastic waste pipes, only the parts of the waste pipes that will be exposed or in direct contact any concrete, but you do need to protect every copper water supply line that will be buried under the ground or exposed to the concrete, with a plastic sleeve. These products can be purchased again at most building supply or plumbing supply stores.

If these pipes aren't protected properly, you could find yourself within a short time, repairing the pipes that are either inside of your concrete foundation or buried underneath your concrete foundation. Either way, this isn't going to be a good thing.

You definitely need to wrap a plastic sleeve around the water supply pipes that are going to be buried or in direct contact with the concrete. This is a must and most building departments will require your plumbing pipes to be wrapped, before it they will sign off on your rough foundation plumbing inspection.

However, for the waste pipes, you can actually use cardboard to protect them. If you're short on funds, why not grab some cardboard boxes, dismantle them and start using cardboard to wrap the pipes, with a little duct tape.

There are plenty of ways to save money in the construction business, buy a few books, read a couple of articles, with a lot of pictures in this can provide you with lots of construction information, from experience building contractors.

Check out some of the best selling Home Building Plumbing Books all on one website

If you're really interested in basement remodeling and repairs, you should click on this link Home Repairs. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading our articles

History of Journaling

A vital part of any writing endeavor is to use a journal to generate ideas for future writing projects. Journaling is an active learning process and it helps us center our thoughts to give them meaning when before they were just swimming aimlessly in our heads. Journaling also gives us a place to record our observations and our memories before life gets too fast for us to remember the small moments which brought us joy once upon a time. The reasoning for recording writing in a notebook is not new. Long before creative writing classes and the use of journals in these classes, field notebooks or logs were vital tools for scientists performing their observations in biology, sociology, and anthropology. In social work and in nursing, journals were also used during internships to record personal growth and learner observations.

Recordings in journals can be traced back to 56 AD China, while in the Western world, journaling became a common practice during the Renaissance when the image of the self became important. In tenth century Japan, ladies of the court used pillow books (so named because they were kept in the bedroom or between the drawers of wooden pillows) to record their dreams and thoughts via poetry and images. Travelers in both the East and West used journals to record their journeys, although Eastern writers integrated more images and poetry into their entries, than Western explorers who stated the facts and details of the places and people they encountered. British sea explorers, such as James Cook and William Bligh, whose logs were later published, recorded their observations, gave an accurate record of events for their chain of command, and recorded significant navigational insights for other naval captains.

Samuel Pepys, who wrote his famous diary from 1660 to 1669, is generally thought to be the first diarist. Not only did he examine current events, he had access to many of these events since he was a high-ranking civil official. He used generous details when describing the people he met and also sought to remedy his past sins by writing about how he could have done things differently. In Europe and America during the eighteenth and nineteenth centuries, diaries were published in record numbers and writers influenced by the Romantic age and individualism recorded their reflections and feelings.

By the late 1960s and early 1970s, journals became vital tools in process writing classes for recording freewrites, brainstorming notes, and notes on research and topic construction. Outside of the writing classroom, journaling is also used to gain knowledge on spiritual quests, while a large number of women use journals to record their thoughts, feelings and observations and to write against and through their Inner Critic. Journaling is also a vital tool in psychotherapy, so that patients can record their thoughts prior to their appointments, and thus speed up their treatment time.

Many times journaling focuses people who are working on a problem and need the space to develop their thoughts. Writer and teacher Ken Macrorie likens a journal to a "seedbed" that needs watering and time to develop into a mature piece of work. He claims, "Keeping a journal forces a writer to put something into the sock every day or so. Often when he reviews what is there, he sees materials that fit together and build." Toby Fulwiler, another professional writer and scholar, states that a journal lays in the middle of the continuum between a diary and a notebook you would keep for a class. He states that the language in a journal should be kept informal and that the writer needs to use first person, so that she is personally reflecting on an issue, and not using other sources that would distance her from the material. Fulwiler also lists that a "good" journal should contain observations, questions (and more questions than answers), speculation, self-awareness, digression, synthesis, revision, and information. In addition, the writer should make frequent entries, and these entries should take some space on the page so that more thoughts and speculations can be captured.

Today we have journals to record our vacations, our dreams, and our goals. Like the journals of history, we should think of our journals as a way for future generations to see what we were struggling with at the time and to know that their dilemmas are not too far removed from ours.

AV Osborn is a poet, writing instructor, award-winning essayist, published web writer, and creative nonfiction workshop leader. She is also a board member of Carolina Wren Press in Durham, NC and a freelance PR/editor. In North Carolina State's MA English program, Alice is currently working on her master's thesis -- a hybrid first-year creative nonfiction curriculum combining rhetoric and cultural studies. She grew up in the Washington, DC area, lived several years in the Lowcountry of South Carolina, and now lives in Raleigh, NC with her husband and young son. Visit her web site at http://www.aliceosborn.com

Installing A 32 Inch Back Door

Painting and Decorating Your Home

Growing up, I had a good friend named Reggie who lived in a house that was always clean, always well decorated. Due to this fact, painting and decorating has always come easy for me.

His mom liked to do a quick re-paint of their whole house every spring. She and Reggie (his dad died when he was young) would take a whole week to give everything a fresh coat of paint. His mom was a very clean women. She was raised on a farm and I guess people back then farm kids were raised well.

Because my best friend and his mom would take a few days to go throughout the house painting, no doubt this made an impression on me. I would come into the kitchen or go through their house and everything was nice and new. A nice lifestyle. Something painting decorating is all about - it adds flavor to our lives.

As I got older and found a wife, I moved into one of my grandfathers apartments. I noticed that he was a good painter also. He painted white ceilings with pastel color walls and the woodwork trim was enameled white also. So from these two experiences alone I learned how to be a good painter decorator.

Basically if I was to do a custom interior paint job, I would get custom color charts from the paint store. Paint stores have historical custom color charts with three-color schemes. This helps to take the guesswork out of matching and choosing colors as well as planning out a color scheme for each room.

From there all you have to do is pick your curtains, bedspreads, carpeting, rugs etc. and match them to your new paint job. That's basically all there is to doing interior decorating as far as I see it. Then comes the talent. Some people have a knack for putting colors together that it looks really good.

If you just moved into a new house and there is existing carpeting that you don't want to change, tile floors, stained woodwork or painted woodwork that you plan on keeping the same, you simply have to match up new colors to those existing items.

I painted for an interior decorator off and on for a few years until they moved to another city. I painted most of her house inside and some of the outside. She had a real knack for pictures, wallpaper and furniture. She also had the money to do it all.

Painting decorating the outside of your home can be mentioned here also. There are exterior custom color charts that show three-color patterns or scenarios, even historical colors.

It can get rather pricey to live life at its best when it comes to painting and decorating your home. If you do a little bit at a time it can be a fun hobby. One thing that I highly recommend as a painter decorator is to use quality paints and wall coverings. Never skimp on these things. After all, why waste your precious time and resources on inferior materials? Especially if you have to live with it.

I like to see people put different colors in every room so that every room that you enter is a treat to the eyes and the emotions. I like to see colors that gradually flow from one room to the next gracefully. It's the little things like that that create the nicer lifestyle. There is power in color. Colors effect our moods.

Some people that I have painted for will put the same drab color in every room throughout the house as if they got a special deal on the paint or something. And some people never paint any rooms until they move out. They never get to enjoy the paint job.

Now I'm not all that good at choosing colors. I remember a friend in school that had some of those doodle art pens and was coloring a psychedelic VW Beetle. All his colors he chose were amazing. They all went together so well and they were bright.

As long as I use a custom color matching chart from the paint store I can do a pretty good job when painting and decorating houses. Nonetheless some people have real knack for making awesome colors flow.

Lee Cusano has owned his own successful painting decorating business since 1991. He has also helped many others to start their own painting business with his "Paint Like a Pro Estimating and Advertising CD-ROM". Lee also offers a new free report titled "How To Quit Your Day Job This Week and Double or Triple Your Income". To get it please go to http://www.painting-business.com

Wood Flooring Problems In Bath

Kitchen Accent Furniture - Perfect For Making Your Kitchen Functional and Appealing to the Eye

Your kitchen, it needs to be both functional and appealing to the eye because you spend a lot of time in it cooking meals for family and friends. Well, to make sure that yours serves both purposes, rely on kitchen accent furniture. There are many options to help you create one awesome kitchen space.

Really, there is a wide variety of kitchen accent furniture that can add both function and beauty to that room starting with hutches. This furnishing offers you a wealth of room to display and store away any number of items ranging from fine china, serving dishes, glasses, cookbooks, linens, and anything else that you want to organize. In addition to that, they are made from all sorts of materials and styled in a number of fabulous ways. For instance, you can purchase one that has a styled in an amazing traditional way with simple lines, delicate accents, and is then finished in a bold cherry stain complemented wonderfully by brass finished hardware.

Hutches are just the beginning when it comes to kitchen accent furniture because there are a slew of other options to pick from as well. For example, maybe you like the hutch idea, but do not have enough room for one. Well, then a sideboard would probably be a better selection for you. Instead of having a large upper cabinet area, it has more of a design like a console table with a spacious surface ideal for displaying different items and a lower area that can be equipped with shelving, drawers, and a cabinet ideal for putting away a wide variety of items. Plus, again they have a stunning look because they can be styled a number of eye-catching ways from those that are very antique in nature and some that are even modern in their appearance. Credenzas and curio cabinets are also a nice choice for stowing away items as well.

Again, the choices of kitchen accent furniture does not stop there either. Some of the other selections that are available include other storage options like bakers racks and kitchen carts, bar stools or counter stools to offer people a nice place to sit at your counter, and there are plenty of kitchen chairs to pick from as well so you know that your guests will be sitting comfortably at your dinner table. A fast and stress free way to take in all the options is by simply jumping on the Internet for some comparison shopping. That's right, the Internet is one of the best ways to shop nowadays because you do not have to go anywhere and waste any gas to do it. When you do come across something that you like, you can find it at the best possible price by simply sifting through the multiple online stores. Plus, what you do purchase will be sent right to your home, thus, allowing you to avoid all that worrying about how to have it shipped from point a to point b.

In the end, your kitchen needs to be both functional and appealing to the eye. To achieve both, just turn to kitchen accent furniture. It would be a grand investment.

Author Jennifer Akre is an entrepreneur who runs different online specialty stores providing consumers with products and information on how to furnish and decorate any indoor or outdoor space. Whether it's your living, bedroom, or even your deck or patio, there are many tips you can use to make those spots both practical and appealing to the eye. Today, she offers advice on how to create a fabulous indoor area by using beautiful kitchen furniture or dining tables. Each would be a great purchase.

Architects And Home Design

Solar DIY Kits and DIY Wind Power

The increase in popularity of the solar DIY kits and wind turbines for homes has brought about a radical change in the way that most people view this technology. For many years, it was ludicrously expensive to install and would take years before you starting to make your initial investment back. There was no such thing as cheap solar panels, but that has all changed. Do it yourself solar panels are not just easy to manufacture in your back yard, but will cost a fraction of the price of the already made models.

Even without any experience in building home solar systems, just about anyone can follow the novice video instructions and build an 80watt panel in their own garage. Just by popping down to the local hardware store, you'll find everything you need. The solar panels cost no more than $200 to manufacture and because you built it, you know how to fix it. A roof solar panel can be used to run a refrigerator, or a television or even a washing machine. At a cost of just a few hundred dollars, you can turn these cheap solar panels into a lucrative income by building them and maintaining them for people you know.

You don't have to stop there, household wind turbines are just as easy to manufacture and at half the cost of a solar panel, you can harvest a breeze into extra power for your home. Wind generators for sale are usually of the marine kind and do an excellent job, but due to the cost involved, they are not often used as wind turbines for homes. The home wind generator can be built in hours and can be a great addition to your alternative energy plan.

With your very own solar wind generator system, you can save money, earn money and in the event that there is a power cut, you don't have to miss that vital sports game. In fact, you can still watch and have a cold beer while the neighbours watch on jealously and all this while doing your bit for the planet.

Stove Smith has lived off grid for a few years on a remote island in Central America and discovered that with the aid of new techology, going green doesn't have to mean going hippy. A tech savvie guy with a passion for saving money and saving the planet. Take a look at how you can cut your bills without spending a fortune and do your bit for the planet while you're at it - http://www.no9to5ers.com

Installing A 32 Inch Back Door

Paint Me a Picture - No - Paint Me a Hall, DIY Style

Painting is one of the easiest DIY projects around. Novice DIY weekend warriors often begin with their DIY home improvement projects by repainting fences, hallways, doors, windows and walls.

Important tools

To be able to do painting jobs around the house, you would need the following:

1. Roller brushes of different sizes- you need different sizes, depending on the job. Roller brushes that are more than six inches in length are good for walls. Smaller roller brushes can be used to paint the bottom of walls. Small roller brushes can also be used to paint tables and chairs.

2. Synthetic brushes- synthetic brushes come in all shapes, sizes and colors. However, as a rule of thumb, purchase those that have fine yet durable strands. Synthetic brushes should be at least two inches wide. Larger brushes should have longer handles.

In addition, large brushes are heavier, so you have the option of attaching them to poles for hard to reach areas, such as the corners of ceilings.

3. Supply of old newspapers- you can use newspapers or similar recyclable papers. Use these to protect furniture and other surfaces when you are painting. Use plenty of paper when painting large surfaces such as walls and ceilings.

4. Plastic paint pans- pans can be bought from hardware stores. These specially made pans hold the paint on one side, while uneven surfaces allow you to remove excess paint.

5. Thinners- thinners will allow you to remove excess and encrusted paint on your roller brushes. Hard, encrusted paint can damage your roller brushes in the end. Never use water, as it will take too long to remove all the paint.

How to paint a hall

It seems daunting at first- the idea of painting a hall. But in reality, some tools and a bit of patience, plus lots of fun will get the job done.

The first step is to clear out your hallway. Put all the stuff in your hallway in another room. This eliminates the need to put newspapers all around. The risk of paint spots on your stuff is reduced to zero.

Second step is to clean the walls with a wet sponge and some soap. Rinse the walls and allow it to completely dry. If there is glossy paint, use a sandpaper to make the surface a bit rougher.

With a roller brush, apply the primer. Proceed to applying two coats of paint. Let the paint dry for a day or two.

Start re-adding things to your hallway. Old, useless things like unused golf bags should not be added to your hallway again. This process will de-clutter your hallway.

To beautify this space, consider adding plant life. Potted plants are a good choice. The potted plants need not be real. You can use plastic daisies or synthetic roses. Just make sure you clean your plants regularly with a wet piece of cloth to preserve their color.

If you do not have a clock in the hallway, consider adding a wall clock. Wall clocks can be either modern or completely classical with swinging pendulums.

The author of this article is Benedict Yossarian. Benedict recommends Roof Bond Foam Roof Insulation and Dekorbeton Concrete Stamping for your DIY needs.

Long Dryer Vent Problems

Room Acoustics & Home Cinema Rooms

Room acoustics play a huge role in creating a successful home cinema. The best home cinema hardware in the world will fail to perform at its best in a badly designed room.

The main issue in a home cinema tends to be excessive reverberation time - this is the time taken for a sound from a speaker to decay by 60dB below its original level - i.e. the amount of time it takes for a sound to dissipate in the room.

If you can imagine standing in a completely empty room with hard floors and ceilings and clapping your hands, the sound will echo for quite some time and therefore take a long time to decay (it reflects off the walls and floor). Now imagine standing in a carpeted bedroom and clapping your hands, the sound would not echo as much and disappear quite quickly (the bed and the carpet would absorb some of the sound). The bedroom has a lower reverberation time than the original room.

In a home cinema it is generally good to have a shorter reverberation time as if the reverberation time of one syllable overlaps the other it can be difficult to make out speech. The same thing happens with sound from the surround sound speakers - one effect overlaps another resulting in a muddle of sound.

Home Cinema Treatments

There are several ways to treat excessive reverberation time - changing the shape of the room is one. Imagine a square box, a wave comes out of the speaker hits the back wall and comes back 180 degrees on itself - muddled sound. Now imagine a complex shape like Octagon, some waves will still bounce back at 180 degrees but the majority will bounce off in different directions - the sound still exists but all the bouncing will reduce its energy quite quickly (and therefore volume) and keep the sounds distinct.

The other way to treat excessive reverberation is to absorb the wave - acoustic panels consist of acoustic substrate finished in fabric. This tends to be the most practical way to improve the sound in your room and the finishing fabric can be almost any design - improving aesthetics at the same time as the sound. Manufacturers such as Cineak and Cinematech have products available in a variety of sizes and shapes to cater for most situations.

Written by: Dave Chester

Custom Controls

http://www.CustomControls.co.uk

Custom Control & Entertainment Solutions - Home Cinema, Multi-Room Audio Video, Home Automation & Lighting Control. Premier Dealers for Crestron, Kaleidescape, Lutron and Bowers & Wilkins.

Architects And Home Design

Optimize DIY Projects - Tips That Elevate DIY to an Art

While some people go into DIY blindly, without any concern for the right kinds of preparation and the right kinds of tools, many choose to listen to the experts.

Experts such as Tommy Walsh (Collins DIY) and Kelly Hoppen (Posh and Becks) all encourage DIY enthusiasts to research, prepare well and find the best ways to do things first.

Surviving DIY

Sometimes it is all a matter of survival. DIY projects, such as replacing floorboards and installing sash windows are not easy. Therefore, some recommendations are in place to make your life easier as a DIY weekend warrior.

Sanding

Sanding should be done with the right kind of sandpaper or sander, and the sanding should be done along the grain. This means you have to find the direction of the cambium and sand that way.

If you sand across the grain, you will end up with a coarse texture that you will have redo to smoothen. DIY enthusiasts know that if you have to repeat something, you did it wrong the first time. Time is gold. Remember, you do not want to be stressed out even before you finish the DIY project.

Another use for butter is...

It is not true that nothing beats WD40 or monkey grease when it comes to reducing friction. Nevertheless, creaking doors, creaking windows and creaking gates can all be remedied with butter.

Use butter that had already melted, and apply liberally around the creaking joints. The butter should have as little water content, and should have high fat content. Avoid overly salted butter as these could react with metal or with wood.

On the use of wood

If you want to install a new gate, new fences and build new shelves for your home, get the woods cut at the merchant. Some people like to saw their planks of wood themselves.

While it is fine if you have an electric saw, it's a waste of time if you are doing it manually. Cutting is almost always free at merchants, so make your measurements before you buy and have your wood pieces cut before you bring them home.

Want a bigger room?

If you want a room to look bigger than it really is, but you do not need extra space, do not knock down the walls yet. You heard us right; do not get that sledgehammer yet.

One very simple way to make a room look bigger than it really is, is hanging a mirror. Try it for yourself and you will instantly see what we mean.

Scrape the scraper

Replacing old wallpapers can be tricky business. Not only have the adhesives dried completely into the wood or concrete, but often, the wallpaper just won't give up.

Some people resort to violence- with a scraper. Unfortunately, scrapers have the tendency to damage the surface below the wallpaper. Paint, wood and concrete come along with the old wallpaper.

In cold countries such as the United Kingdom, depleted walls are never good things. What is the solution? Hire a steamer machine and use it to tear the wallpaper naturally from the wall.

This article was brought to you by Springfields Army Stores, a leading supplier of camping equipment in the UK

Buying A Functional House

Dual Pane Window Glass Repair

For the past few weeks, I have been explaining how to repair a broken window pane in your home. But, what if you have dual pane windows? Is the process the same? Well, pretty much, except for a couple of variations. So, let's review the single pane repair process, and I will point out the differences regarding dual pane windows.

When we start talking about dual pane windows, one of the first things that comes to mind is vinyl window frames instead of aluminum. When dealing with dual pane windows, you can have either aluminum or vinyl frames, depending on the year the house was built. Dual pane glass got popular in the 1980's, but vinyl frames didn't really catch on until the 1990's. So, if your house is less than 10 years old, chances are you have vinyl framed windows. In either case, I will discuss the differences. Let's say you have a sliding aluminum frame window with dual pane glass. The procedure for removing the frame from the opening and the glass from the sash is the same as with the single pane windows.

The differences are, first, the glass goes into the frame about twice as far as the single pane window. The single pane window glass went 1/4" into the surrounding rubber. The dual pane usually goes 1/2" into the rubber. So, if both pieces of glass have been broken, you are going to have to order a new IGU (Insulated Glass Unit) from the local glass shop. They are going to want to know the width, height, overall thickness, and possibly the individual glass thickness. The best way to get the dimensions is to measure the width and height from rubber to rubber, write those numbers down. Then, remove the panel from the opening and place it on a table like we did with the single pane window. Remove the screws from opposite corners and pull of the frame. You will be able to see how far the glass goes into the surrounding rubber. If it's 1/2", then you want to add 1" to the width and height that you measured previously (1/2" times two sides= 1"). Then, measure the overall thickness of the unit by removing the rubber from the glass edge.

Typically, this dimension is 1/2", but not always. There is a metal spacer that divides the two panes of glass. Make a note of the color so you can request the same color in the new IGU. It's either going to be silver or bronze. If you want to get the same size spacer you need to give the glass shop the thickness of each piece of glass in the IGU. If the old unit has 1/8" glass on both sides, and the overall thickness of the unit is 1/2", then they will use a 1/4" spacer. If the glass is 3/32" on both sides, they will use a 5/16" spacer. If you don't care about matching the spacer thickness, you can request the thicker 1/8" glass, and they will automatically use a 1/4" spacer.

When you get the new IGU home, the installation is the same as the single pane window. Now, what if only one side of the IGU has been broken? Many times the outer pane will break, but the inside pane is fine. You can order a whole new IGU Like we just did, or, if you're the adventurous type, you can order only the single pane of glass that was broken and replace it. I'm going to explain how to do it, then i'm going to tell you the things that can go wrong. After you have the window pane on the table with the surrounding frame removed, you will see a black rubber type substance around the edge where the spacer is applied. This is a butyl sealant, and you have to separate the broken glass from this butyl. The best way to do it is to take a utility knife with a new blade and break through the butyl where it meets the broken glass. Then, take a new hacksaw blade, and push it into the area where you sparated the butyl from the glass. You don't want the hacksaw blade to be attached to a hacksaw. Using your hand, saw back and forth as you work your way around the edge of the glass. This should allow you to remove the glass.

Once that's done, lay rags on top of the good piece of glass to catch any debris, and scrape the surface of the spacer that will be contacting the new glass. Use a putty knife. Then, remove the rags and debris. When you are ready to put the new glass on, clean the inside of the good piece of glass that you didn't remove. Remember, once you install the new glass, any debris or finger marks on the inside will be permanently sealed. So, clean it real good and check it from all angles. Do the same to the side of the new glass that will be going to the inside of the IGU. Then, run a thin bead of clear silicone around the entire perimeter of the spacer. Set your new glass on the spacer and use finger pressure to adhere the glass to the silicone all the way around.Then, come in from the side, and run silicone around the side where the glass and spacer meet. Cover the window opening with something for 24 hours. You do not want to touch the IGU for 24 hours. The silicone needs to cure. After 24 hours, you can assemble the unit and install it back into the opening.

There are a couple of things that can go wrong. The first one is leaving marks on the inside portion of the glass. Once you seal the glass, you cannot clean what's between the panes. The other thing involves condensation between the panes. If you have even the slightest break in the silicone seal around the glass, chances are you will beging to see moisture form as soon as the nights get cold and the days get warm. You are going to have to decide if you are confident enough in your ability to do the job right, or if it's better to pay the extra money to have it done for you. Just because you pay someone to do it, doesn't mean you still won't encounter the same problems. The difference is, they have to guarantee their IGU for a minimum of 1 year. I have received many units over the years that had marks in between the glass. The beauty of it is the manufacturer can't dispute it, because there's no way anyone else could have done it except them.

OK, what if the window frames are vinyl instead of aluminum? Well, the main difference is the glass in a vinyl window no longer has the rubber gasket around the edge. You dont remove the opposite corner screws and separate the frame from the glass. What they do is put either silicone or a two sided tape on the lip of the frame where the glass rests. That's what holds the glass in the frame, then they apply a snap in stop on all four sides of the glass. So, you have to remove the stops first, then turn over the panel and break the seal holding the glass to the frame using a utility knife. Wear gloves during this procedure. If only one side of the IGU is broken, don't even think about repairing just the one side. You will never get that IGU out of the frame without breaking the other piece of glass in the process. But, on the positive side, you can remove the stops without taking the panel out if it's a slider. You can then measure the dimensions of the glass, and order the new IGU. That way you eliminate any need to temporarily cover up your window. The same is true for the stationary portion of a slider, or a picture window. Before you install the new IGU, be sure and clean the lip that had the tape or silicone, and apply either silicone or tape. Either will work.

You will discover that replacing an IGU in an aluminum frame window is a whole lot easier than a vinyl window. But, in either case, you can do it yourself and save a few bucks.

John Rocco has been installing replacement windows since 1978. To learn more, visit How To Install Windows

What To Do If Your Home Floods

Interior Redesign

Many of you may be considering to makeover your living room, kid's room or renovate whole home before the coming year. However if the cost or time factor is the spoke in the wheel for your grand plans, then Interior Redesign is the answer for you. It is an affordable alternative to "start from scratch" Interior Design. It is a specialized decorating service that not only gives the space an entirely new look but also saves time and money!

Although this concept is in nascent stages as yet, however looking at its advantages it sure will grow in popularity. Interior Redesign is a credible and affordable service for just about everyone. Some of the traditional designers have now been adding interior redesign to their list of services.

So if you are planning to get the interiors done for a particular room or entire home on a budget, hire an interior redesign professional who with their fresh perspective can visualize the potential of your space objectively & will use the existing furniture, lighting, art & accessories to transform the room into a more functional and stylish space. This new twist on interior decorating is called Interior Redesign.

Reasons to Redesign:
Your house has carefully chosen loved pieces but still lacks a pulled together look.
Your home looks exactly the same for the past three years or more & feels stale.
The house is rented, you are desperate for new look but knocking down of walls or major expenditure is not viable.
Clutter of all the pieces & memorabilia you cherish seems to sabotage all your creative efforts.
You would like to renovate the home but are completely overwhelmed by the prospect of complete interiors.
You would like to incorporate latest modern accessories & gadgets with your delicate antique furniture but don't know how to do it in a cohesive manner.

Process of Redesign
The interior redesign professionals will first discuss your lifestyle and the function of the proposed room during which you may go over any special needs of the family. The designer will also give you suggestions about presently required new items & optional future purchases to complement the existing pieces.

Some of the basic steps involved are
-Space planning & making efficient use of your existing space.
-Selecting a focal point of the room. Creation of overall color scheme.
-The placement of furniture that will complement the focal point
-Using lighting & light fixtures correctly.
-Choosing the right window treatments & incorporating the existing style & material.
-Addition of rugs, side tables, shopped from your own home. For example swapping side tables in your bedroom with the end tables, if it matches the style in your room redesign.
-Adding artwork and accessories by looking for pieces in your home like photographs and personal collections.
-Finally re-vitalizing the room by re-placing (not replacing) existing furniture, artwork accessories & complementing newly shopped items.

As is rightly said great interiors is not about having beautiful things but about knowing how to play with those beautiful things. So as a prelude to this New Year pamper your home, get reintroduced to your long lost possessions and get ready for dramatic results, sans the pain of time & money consuming structural alterations & shopping trips.
'Start from scratch' interiors is not de rigueur to achieve a new 'feel & look' for your home. Redesigning is all about borrowing from the past and moving into the future!

Painting A French Door

Remodeling Green Takes the Right Mindset

To a real estate investor remodeling green may mean the money they are going to make from renovating that ugly house they just bought for a SUCH A DEAL price. To others, it means they want to preserve the earth and not waste energy, building materials or resources when they remodel their home. Some homeowners and contractors look for and use only products that are advertised as being green, or being manufactured in a way that is as non-toxic as possible. They may put in new appliances and HVAC units that are energy efficient. And build new properties with an eye to energy efficiency in the construction methods applied. That's all good.

Another way to remodel green is to think about what may be thrown in landfills when it could be used again. Some demolitions are done too quickly and roughly to save much of anything. Taking some time there can keep hundreds of pounds of good building materials out of the waste stream. I once had someone tease me on a job site because I was taking some time to remove a few nails from lumber. I had found some 14 foot long hardwood 2x6s with no knotholes and two or three nails in each of them. Hey, I'll spend 15 minutes any day to save $100 worth of wood from being dumped. I doubt you could get lumber that good anymore in most places without paying a stiff premium price. Bring me a truckload, please. You woodworkers know what I'm talking about. Yes, there IS wood pretty enough to admire and remember. Think about each component that you are removing, or working on, during a renovation and decide on a way to remove it with the least damage. Someone may want it if you don't. Haste DOES make waste!

One of the tricks I've done is to keep the area of a countertop that has to be cutout for sinks, etc. I install legs using common items I may have recycled from somewhere else and add those little caster wheels that can be bought cheaply in most large home improvement stores. The ones with locking mechanisms are nice. All you have to worry about is smoothing the cut edges and installing edging or simply routing the edge into a nice shape. You can have a matching rolling portable countertop space without spending much time or money. Oh yeah, don't forget to see if someone can use the old countertop and sink for a garage parts washing basin, garden potting center or maybe a fish cleaning station for the outdoors folks.

If you cruise the tool aisles, I'm sure you know about the great numbers of handy dandy gadgety items for sale. Nail sets are nice, but if you don't have one, try using a nail with a slightly larger head than the one you are driving. A tap or two with the nails head to head and your nail is set. Ever seen one of those plastic nail holders that keeps you from banging your fingers and waking the neighborhood cats with your wailing? Try a small piece of cardboard instead. A little notch and your fingers can be protected. Or the plastic spreaders sold to apply many materials. You can use the plastic lids found on many food containers in the grocery store. You can cut a round lid in half and have a nifty spreader of a custom size. Or the plastic pans sold to hold a small amount of the liquid materials for outrageous prices. Try one of those plastic tops they use on bakery cakes, or the microwave convenience food plastic bowls instead . Instead of buying a sanding block, why not try using a small scrap piece of wood from your projects? Egg cartons can be used to organize small items. It's my mission not to let any plastic have only one use in my household. Only problem is, if it is a while before you need them, these saved treasures may change your nickname to pack rat, but multiple use recycling is remodeling green so who cares? You get the idea. Go for it!

For more interesting information and resources visit us at: http://www.mynetmagic.com

Long Dryer Vent Problems

Why Basement Remodeling

With the long-running housing crunch in New York caused by the influx of people wanting to be a part of it; smaller living units have become the more popular choice posing as the more affordable option. Naturally, one thing that New York homeowners would have in mind when thinking of undertaking a home improvement project would be more living space. Instead of gaining a home addition that requires tearing down walls and extending the area of your homes, the best possible solution is exhausting the possibilities that any unused area in your home has to offer. This makes basement remodeling an ideal project.

Now you are thinking, 'Why would I want to use my dungeon-like basement when I could extend and create another floor above my roof or enlarge an existing room?' To answer this and lay out more benefits, here are several points explaining why basement remodeling is the best way to go:

- Basement remodeling is a lot cheaper to work on to add square footage to your current living area than a full home addition. Even with most or with every same feature and design, it would only end up costing just a chunk of the whole budget that a full-scale home addition amounts to. With the latter, there would still be a need to not only demolish any existing wall or roof, you would also have to rebuild another to surround the additional expanse. But with remodeling your basement all the crucial structural foundations are already built like the walls, flooring and ceiling.

- Unlike other home improvement projects, basement remodeling involves an area which is not much frequented and is quite isolated. So even when the project is undergoing, you and your family will not be required to put up with so much of the hassles such as the noise caused by the ongoing construction as well as the traffic of contractors and other workers going about their works.

- Being literally surrounded by earth, the basement is typically cooler even if the sun is sizzling hot on summers and warmer during chilly winter months. So no matter what finish you plan and come up with, it will surely be enjoyed with the added benefit of its energy-efficiency.

- The ready availability and easy access to plumbing makes adding another bathroom or a kitchenette ideal. You can do your basement remodeling to result to a luxuriant personal spa, turning every inch of your basement into a haven of utter comfort. But even if you have other plans, the new room could still make good use of the added bathroom or kitchenette. This idea would not only considerably boost the quality of living in your home but add real value to it as well.

- When thinking of the best finish for your basement remodeling project, you can take advantage of the compact nature of the structures making up the basement and its intentional remoteness from the rest of your home. These characteristics make up for utmost privacy as well as great sound proofing. You could opt to have a playpen, home office, music room, and home theatre out of the project finish.

These enumerated, excellently answers why basement remodeling. Another consideration to include in your home improvement project is a qualified basement remodeling contractor. With this, you are just some steps away from project success.

Eugene Makeev has been in the home improvement industry for a while. His skills and expertise, which have been polished through time, are now used to help New York home owners avoid the common pitfalls in home improvements by matching their needs with the right, prescreened Basement Contractor New York. Feel free to use our Basement Remodeling Calculator.

Going Green Facts - Homemade Energy

With today's energy crisis and rising costs of heating and electricity, educating yourself on how you can save money, get money back into your pocket through government grants, and help do your part learning about the Going Green Facts - Homemade Energy.

The statistics prove that there is non-renewable energy that we consume in our daily lives that can be reversed by a few simple things that can be implemented by consumers with the knowledge of how to utilize what the earth has provided for us with wind, biodegradable materials and solar power. Below are a few shocking statistics that will open your eyes on what we are taking and not giving back.

US Energy Consumption By Source

Non-Renewable

• Petroleum: Used for transportation and manufacturing--------- 38.1%
• Natural Gas: Used for heating, manufacturing and electricity - 22.9%
• Coal: Used for electricity and manufacturing ----------------------- 23.2%
• Uranium: Used for electricity ---------------------------------------------- 8.1%
• Propane: Used for heating and manufacturing --------------------- 1.7%

Renewable

• Biomass: Used for heating, electricity and transportation ------- 2.9%
• Hydro-power: Used for electricity ---------------------------------------- 2.7%
• Geothermal: Used for heating and electricity ----------------------- 0.3%
• Wind: Used for electricity ------------------------------------------------- 0.1%
• Solar & other: Used for light, heating and electricity -------------- 0.1%

So as you can see the numbers are staggering and with a bit of knowledge under your belt, you can save a great deal of money with renewable energy. Wind turbines and solar power are just to name a few. Taking your time to recycle waste products will do Mother Earth good also. A lot of what is recycled will be turned into a product which can be used again and again. Ordinary waste can be converted into renewable energy thanks to our Waste Management companies. Waste Management's landfill gas-to-energy projects generate enough energy to power 160,000 homes every day. That translates into almost 5 million barrels of oil per year.

With your knowledge of Going Green Facts, Homemade Energy can be made with ease to save you money and put the cashola back into your pocket. For example: Did you know that if your purchase a hybrid car, plans and build a wind generator or solar panels with Obama's home energy grant program you can be rewarded by the Federal Government by receiving funding to help with their plan on reducing our dependence on fossil fuels? This is one of their top agenda items for 2009. Depending on what you do, there has been reported funding of anywhere from $600-$2000. That's a lot of ching! You must have a receipt for your purchase of course, and apply for grant funding at the home energy grants website.

If you are eligible, you will receive a check in a month or two. You can't however apply for multiple energy grants. For example, if you own a hybrid car, solar panel and a wind generator you can specify the information in the grant kit if you qualify to receive it. What a way to get some of those hard earned dollars put back into your pocket.

Do your research and find out how you can help convert your home into renewable energy and put money back in your pocket. When you educate yourself on the Going Green Facts Homemade Energy is where to start. Whether you choose wind, solar, or both will be the best thing you will ever do for the crisis that all of us are faced with on a daily basis. Green living is not as hard as it sounds and with a little knowledge and a few items, you could get off the grid and let the power company pay you.

With today's energy crisis you can not afford to waste energy. Let the Sun and the Wind give you all the energy you need. Why Wouldn"t You Want To Learn How To Build Your Own Solar and Wind Energy? Get a jump start on today's energy crisis with Homemade Energy

Suspended Ceilings - Home Tips

Suspended ceiling or known also as dropped ceilings are ceilings that are placed underneath the existing one and hide any kinds of wiring or piping that may be sticking out of the current ceiling. Suspended ceilings are a great idea as they allow you to hide all of the clutter that is up there already allowing for maintenance to be carried out on anything that is there without as much risk as you would without the suspended ceiling being there.

They are made up from a grid that contains metal frameworks which is held together with wires which connect up to the existing ceiling, in this grid tiles are placed and linked up, this is what makes the basis of a suspended ceiling even thought there are many different types of suspended ceilings, they all seem to follow the same basis.

Suspended ceiling started being made to help with sound levels in rooms and offers sound absorption. This is made by adding insulation above the tiles, this helps to absorb the sound in the room.

Now though sound absorption is not the only reason for getting suspended ceilings installed, nowadays you can have a lot of different reasons for example you may want to hide pipes or create air ducts for you building, if this is the case then suspended ceilings are definitely the way forward for you.

When you are thinking about getting your suspended ceilings installed there should be one main concern on your mind, this is Safety. You need to know that your ceilings are going to be safe and cause no harm to anyone or be a hazard in any way. You are going to need to make sure that the tiles and anything else you place up in the suspended ceilings in firmly attached to the grid otherwise there can be problems with the ceiling falling down or in the event of an emergency where the ceiling has to be pulled down I.e. a fire, then the whole ceiling can be brought down as one and doesn't come down in pieces causing major hazards.

If you are going to install suspended ceilings in a clean room then you need to make sure that the suspended ceiling complies with all rules and laws that are set. If your suspended ceilings are in any way contaminated with dust or particles then your whole clean room becomes pointless and questionable.

Clean rooms are required in many different industries which include food, electronic and pharmaceuticals. If your room does not meet the industry standards you can be closed down, so therefore making sure that your suspended ceilings in no way effect your business you will need to make sure that you can meet requirements with your ceilings. You will need to have a steady flow of purified air being brought into the room; this can be easily incorporated into suspended ceilings in the ceiling void above.

So before purchasing your suspended ceilings you should make sure that it complies 100% with all of your health and safety regulations.

Find more about Suspended Ceilings

Why You Should Go For Punched Tin Light Fixtures

Punched tin light fixtures are associated with early American chandeliers and lamps. Today, original punched tin light fixtures are going for a fortune, unless of course you want to settle for an imitation. Making them the old fashioned way, creates a high quality and beautiful product. Choosing between the finer hand crafted product and the mass produced product in the market is only dependent on the individual preference and the specific application that one needs the it for.

The handcrafted punched tin light fixtures are more expensive. They come in many different types such as Spun Wood Chandeliers, Tin Chandeliers, Exterior Lighting, Hanging Lights, Sconces & Lamps, Ceiling Light Fixtures, wall lamps, and lanterns. They blend in perfectly with a rustic home decor. Internet sites are one of the easiest ways to purchase these customized fixtures. You will be provided with high quality lighting fixtures inspired by American colonial traditions. they could be made of solid copper and brass. The lights are available in different finishes, aged finish, a dark gray color, wood finish and painted finishes.

Before buying punched tin light fixtures there are a few details that you need to check and certify; Check to make sure that the wiring is properly put in place, what kind of bulbs they use i.e. do they use fluorescent lights or light emitting diodes? Is it easy to access the bulb during replacement? How practical is the fixture? does it hang too low or too high? There are many small family businesses out there that deal in the production of Punched tin light fixtures as a matter of tradition and you can expect them to give you high quality finishing of these cultural and historic heritage of the American nation.

Peter Gitundu Researches and Reports on Light Fixtures. For More Information on Punched Tin Light Fixtures, Visit His Site at PUNCHED TIN LIGHT FIXTURES

Environmental Strategy for Sustaining Life - One Day at a Time

Where do you start making changes that are easy and sustainable? Think of your home and office as the first place where you can identify and evaluate the eco-impact of the products you use. When we minimize waste by reducing, reusing and recycling we change the course of events that have caused the negative side effects like pollution and global warming. We can all start today making a positive impact on our future.

When you're printing out that next document, ask yourself, "Do I really need to print that?" The less paper we use and waste the more trees remain standing, converting carbon dioxide back into oxygen. According to EnviroZine, It takes 1000 average trees to convert the carbon footprint of an average car traveling 12,500 miles per year. Before you make your next printing paper purchase check out the post consumer (recycled) versions of paper and look for the percentage of reuse. 100% post consumer content paper is twice the price of virgin paper at this time, but by using half as much you can justify the cost and save more trees. You can also reuse paper by printing on both sides or by cutting them into scrap paper.

As we realize the advantages of conservation on a personal level and we start changing one thing at a time like incandescence light bulbs to Compact Fluorescent Lights - CFL. That one change provides a huge savings in resources. If every American home replaced just one incandescence light bulb with an ENERGY STAR qualified bulb, we would save enough energy to light more than 3 million homes for a year, more than $600 million in annual energy costs and prevent greenhouse gases equivalent to the emissions of more than 800,000 cars. Energy Star qualified bulbs use about 75 percent less energy than standard incandescent bulbs and last up to 10 times longer.

Before you make a purchase of your next appliance, printer or electronics, research and ask for energy efficient and energy saving ratings. As you start to replace old items with new that lessen energy consumption, you're doing your part to conserve. Refrigerators, freezers, washers, dryers, TV's and electronics, manufactured before 2001, use much more energy than the new Energy Star rated appliances do today.

Encourage and promote ideas for improving energy conservation. It starts with small changes that add up to big savings. The addition of protection power outlet strips for all your electronics and appliances that can be turned off when you leave for the day. One button per strip turns everything off. It's an amazing way to conserve energy and a noticeable savings on your energy bill.

How can we protect and improve our water and air quality? If businesses are dumping in your area, make that information known to the proper stewards. Our natural resources are too precious to pollute along with the wildlife and fish that become contaminated, endangering life cycles that throw off the natural balance we have on our planet. Anyone dumping chemicals or waste into the air or water would want to start looking for alternative ways for disposal. Start the process by asking your company what changes they are making to ensure the future of our planet. Small things like batteries and toner need recycled not thrown out, Styrofoam and certain plastics are not biodegradable, so we need to stop using them.

As we're all making a conscious effort to conserve energy and our natural resources, think reduce, reuse and recycle with everything you do. These small changes activate our awareness to find more eco-friendly behaviors that will continue to sustain our planet and make it healthier for all the inhabitants.

http://www.energystar.gov/index.cfm?c=cfls.pr_cfls

http://www.ec.gc.ca/EnviroZine/English/issues/02/any_questions_e.cfm

Susan Elaine Wheeler's fascination with human nature started at a very young age, always asking the question why. Why do people do the things they do? The cause and effect of our behaviors determine our environments with the decisions we make. Susan's career successes include owning her marketing company AMPS, National Sales for Kramer Guitars, creating Professional Accounts in Hollywood, CA and this year starting a new company, Creative Perspective Solutions, CPS working with individuals and companies that want to accelerate their excellence while maximizing their talents, qualities and vision through effective communications.

(c) 2008 Creative Perspective Solutions

http://susanewheeler.com/

Researching a General Contractor in New York

This may come as a shock to many; the State of New York does not require a general contractor to have a state-issued license. Other large states like Illinois and Texas also do not require the GC to have a license, but these are in the minority. To be a general contractor New York, or a remodeling contractor New York, or in New York City, one can get a Home Improvement Contractor License. This process is officiated by the Department of Consumer Affairs.

The contractor New York with a satisfactory rating on the web can be your best bet. In addition to tracking down a report from the Better Business Bureau or checking with the above discussed Consumer Affairs agency, making sure that a contractor in New York has made other customers happy is a good indicator that you will be satisfied as well.

The procedure of researching a New York contractor should also include a determination on the status of their liability insurance. If something goes wrong in the building you live in as a result of the work being done in your apartment, liability insurance will become very important. The same goes for worker injuries or damaged property. Liability insurance data for a general contractor in NY can usually be found on the Buildings Information System website.

Be sure to make a checklist of places to read about a prospective contractor New York, from directory websites, to their own homepage, to government agencies to consumer agencies so that you can make the decision with all the facts.

Myself webmaster of http://www.cityhammer.com dealing in all type of Home improvement and remodeling need such as interior designer New York, interior decorator New York, electrician New York, flooring New York, carpenter carpentry New York, cleaning service New York.

Advantages of Solar Power Vs Disadvantages of Solar Power

Many households are considering of converting their home energy to be solar powered for the purpose of cutting down their electricity bills while saving our planet with this environmental friendly power source. But, not many are taking their action to make the real conversion to a solar-powered home because they are still doubt on the advantages of solar power that they can really get after the conversion while they do worry about the potential problems that may encountered after they make the conversion. Let briefly go through the advantages versus the disadvantages of solar power, so that you are cleared before you make your decision on whether to use solar-powered energy at home.

Advantages of Solar Power

1. Solar power is a renewable source generated from the sun, meaning that the solar energy source is never going to finish. So, we do not need to worry about we may jeopardy of the energy source if you over use it.
2. Solar power is environmental friendly energy source. Unlike oil, the use of solar energy will never causes green house effects or emits carcinogens into the air and causes the air pollution.
3. The sun is FREE. Unlike the traditional energy source which you need to pay more if you use more, there is not limit on how much you can use the energy generated from solar power, and you do not need to think of the electricity cost when you use a solar-powered energy generator, because the sun is FOC (Free of Charge).
4. Little maintenance cost on solar power system. Solar cells can last for a lifetime and because there are no moving parts, it needs very little maintenance. You do not really need to allocate significant budget for it maintenance cost.

Disadvantages of Solar Power

1. The key stopping factor that makes most of people who are interested to install solar power system is the total cost is expensive. A solar power system that provides enough energy to power an average sized home can cost anywhere from $6,000 to $20,000. Seeing the potential market demand on solar power system, the industries with continue research efforts are trying to reduce the material costs. Moreover, there are many simple-to-follow DIY instruction manuals had been made published to teach people how to build their own solar power system using cheap materials which can be found at local market.
2. The solar power can be generated without sunlight, which means the power cannot be created at night, during rain and winter season when sun is hiding behind the cloud. This had been one of key discouragement of using solar power as the alternative power solution.
3. If you build the solar panel at the roof of your home, it becomes part of the house. You may need to sell it together with your house if you decide to move to a new home. And you need to reinstall the solar power system at your new home.

Summary

You should clearly understand of both the advantages and the disadvantages of solar power system before you go ahead to convert your home to be solar-powered so that you can really benefited from the advantages of solar power while handling the disadvantages of solar power to minimize the impacts.

Dave Stilman, the author warns you not to buy any of Renewable Home Energy Guide without reading the important review at http://www.wind-solar-power.info.

How Water Restoration Services Can Help Your Home

Water damage can be found anywhere in your home and not only can it cause a lot of frustration, it can also cost money to get it repaired and restored. Some people think that all it takes is to get a wet vac and suck up the water and dampness.

Unfortunately, it doesn't work like that. You will find out that there are other hazards that come from water damage which can affect you and your property.

You may not be able to see all of the damage, but it's there. A lot of times, it may just be too much for one or two people to deal with. If you're dealing with a leak that was ongoing or a severe inclement weather, then rest assured you will need to have professional help.

If it's due to severe inclement weather, you may have to deal with more than just water seeping into your home. Along with the water comes mud and debris piled up together. In this case, there's no doubt that you will need the services of a professional company that specializes in water damage restoration.

Some people don't realize what kind of damage that water on its own can cause. Carpets can be soaked, items can be soaked or damaged, and the water damage level can reach an unprecedented level. The material used for the home, such as drywall or wood, can be damaged. Once the water seeps in and makes contact, it's crucial that the water is removed as soon as possible.

Another thing that you can be faced with is the presence of mold. Mold is toxic and can cause allergies to trigger and even cause the onset of asthma. A lot of companies that specialize in water damage restoration know the perils of having mold in a home. They work very quickly to remove the affected material so that it won't spread. They also try to remove it prior to it starting up.

If it gets to the point where mold has made contact with items in the house, then they are no longer salvageable. They use special equipment to get rid of the mold that is already growing inside of the home.

They also work to get rid of any water and dampness that is still there. The technicians work to fend off mildew, which can leave a horrible smell. They use a special cleaning solution and deodorizer to make it look and smell fresh.

The water restoration company is also in the business of restoring and repairing parts of your home that were damaged. Of course, your house has to be livable in order for this to happen. When looking for a water restoration company, look for one that has experience in all areas of water damage. They should be reputable and willing to do what it takes to get you back on track.

Leo Nov is an editorial staff member of RestorationSOS.com, a leading service provider for water damage cleanups. To learn more about Water Damage Cleanup New York and Water Damage Restoration New York, visit RestorationSOS.com.

Preventing Exterior Fires to Your Home

It is important to consider the exterior of your home as a hazard arean and should be a part of your property protection plan. Don't overlook the patio, back yard, roof and garden when making your inspection for fire hazards. These areas are just as important as the interior of your home, especially since there are other factors that can affect a fire's behavior.

Roof Safety

There are many homes lost due to the roof catching fire. If you are building or replacing the roof, ask your contractor about using non-combustible or fire resistant roofing materials, such as Class A shingles, metal, or tiles. If roof of your home is not fire retardant, it can be treated with fire retardant processes to reduce its flammability.

Yard Safety Cleaning

If you have a wood pile in your yard, following some basic fire safety rules can prevent it from catching fire. Always remember that the way you maintain the wood pile can reduce the occurrence, size, and intensity of a fire. Make a safety parimeter around the wood with about 30 feet of clearance. A fresh, green lawn makes a good safety parimeter, as long as it is clear of leaves, twigs, and other fuel for a fire.

When it comes to plants and trees, some are more fire resistant than others. For example, hardwood trees are more fire resistant than pine trees. Remove dry leaves, dead limbs, twigs and debris as they can turn a small fire into a large one. By thinning out your trees to keep a fifteen foot distance between tree crowns you can reduce the chance of fire spreading from tree to tree.

Tree limbs and dead branches should be removed from about 6 to 10 feet off the ground to prevent fires from spreading from the ground to the trees. Trees should be well maintained and pruned near buildings, stovepipes and chimneys.

Outdoor Grill

The best way to keep your outdoor gas grill in good and safe condition is to keep it clean of dirt, grease, and debris. Periodically check the case line for cracks. Propane or natural gas leaking from a cracked hose can be extremely hazardous.

Leo Nov is an editorial staff member of RestorationSOS, to learn more about fire damage and fire and smoke damage cleanup visit RestorationSOS.com or call 1-877-767-2407.